APEM 2-Axis Joystick Round, IP67, 240 V ac, 10A

Bekijk alle Joysticks
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 95,30

(excl. BTW)

€ 115,31

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks
Per stuk
1 - 4€ 95,30
5 - 9€ 87,69
10 - 24€ 85,77
25 - 49€ 78,15
50 +€ 71,48

*prijsindicatie

RS-stocknr.:
789-7331
Fabrikantnummer:
3D2-ZBE-08-520
Fabrikant:
APEM
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

APEM

Series

1000

Number of Axes

2

Product Type

Joystick

IP Rating

IP67

Handle Type

Round

Contact AC Voltage

240V ac

Switch Contact Current

10A

Contact Material

Silver

Joystick Travel

±12°

Terminal Type

Solder

Mechanical Life

1000000Operations

Standards/Approvals

RoHS

Maximum Operating Temperature

50°C

Minimum Operating Temperature

-20°C

Land van herkomst:
GB
This unit comes supplied with a + and - limiter for applications where only one axis may be used at a time. The limiters are not pre-fitted so the user can decide which to use or even if it is required. It is also equipped with single pole contacts. This unit comes with double pole contacts.

Round phenolic handle

Panel Mounted V4 1000 HE Series Joysticks


Due to the proven success of the 1000 series joysticks, APEM decided to extend the range and include variations intended for use in harsh environments. All options include a panel seal rating of IP67 and an operating temperature range of -20 to +50°C.

The series comes sprung to centre as standard with an open square gate giving full control of both the X and Y axis (north, south, east and west). To give you the highest possible flexibility of connection, they are supplied as standard without a cable harness.

These units are fitted with the Option 3 version of switches and are able to switch up to 10A on a 240 V ac circuit, higher than most applications would require. The handles are mounted to a stainless steel shaft which in turn is fitted with a Kumho/Neoprene sealing boot. The boot is able to offer protection from substances such as oils and petroleum and is UV resistant.

Features & Benefits


Double sealed

Oil/acid/alkali resistant boot

22 mm diameter bush mounting

V4 switches

Outer hex nut for wrench tightening

Product Application Information


The high level of ingress protection and the high-quality materials used to produce these units makes them ideal for outdoor use, lifting platforms and materials handling devices.

Gerelateerde Links