ACPL-C87A-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- RS-stocknr.:
- 922-6765
- Fabrikantnummer:
- ACPL-C87A-000E
- Fabrikant:
- Broadcom
Bulkkorting beschikbaar
Subtotaal (1 tube van 80 eenheden)*
€ 326,32
(excl. BTW)
€ 394,88
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 80 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 80 - 320 | € 4,079 | € 326,32 |
| 400 - 720 | € 3,671 | € 293,68 |
| 800 + | € 3,495 | € 279,60 |
*prijsindicatie
- RS-stocknr.:
- 922-6765
- Fabrikantnummer:
- ACPL-C87A-000E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Power Supply Type | Single | |
| Typical Single Supply Voltage | 4.5 → 5.5 V | |
| Isolation Mode Rejection | -78dB | |
| Number of Channels per Chip | 1 | |
| Maximum Voltage Gain | 1.01V/V | |
| Mounting Type | Surface Mount | |
| Package Type | SSOP | |
| Pin Count | 8 | |
| Dimensions | 5.85 x 6.807 x 3.18mm | |
| Height | 3.18mm | |
| Width | 6.807mm | |
| Length | 5.85mm | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +105 °C | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Power Supply Type Single | ||
Typical Single Supply Voltage 4.5 → 5.5 V | ||
Isolation Mode Rejection -78dB | ||
Number of Channels per Chip 1 | ||
Maximum Voltage Gain 1.01V/V | ||
Mounting Type Surface Mount | ||
Package Type SSOP | ||
Pin Count 8 | ||
Dimensions 5.85 x 6.807 x 3.18mm | ||
Height 3.18mm | ||
Width 6.807mm | ||
Length 5.85mm | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +105 °C | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Gerelateerde Links
- ACPL-C87A-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C87B-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C870-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C79A-000E Broadcom, 2-Channel Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C79B-000E Broadcom, 2-Channel Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP
- ACPL-C784-000E Broadcom, Isolation Amplifier, 5 V, 8-Pin SSOP
- ACPL-782T-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin DIP
- ACPL-782T-000E Broadcom, Isolation Amplifier