Broadcom Isolation Amplifier, 8-Pin 6V SOIC
- RS-stocknr.:
- 910-8229P
- Fabrikantnummer:
- ACNT-H79A-000E
- Fabrikant:
- Broadcom
Subtotaal 1 eenheid (geleverd in een buis)*
€ 9,46
(excl. BTW)
€ 11,45
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 473 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 9,46 |
*prijsindicatie
- RS-stocknr.:
- 910-8229P
- Fabrikantnummer:
- ACNT-H79A-000E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 6V | |
| Minimum Supply Voltage | 3V | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Isolation Type | Optical | |
| Minimum Operating Temperature | -40°C | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Vos - Input Offset Voltage | -2 → 2 mV | |
| Isolation Voltage | 7500Vrms | |
| Maximum Operating Temperature | 105°C | |
| Height | 3.4mm | |
| Length | 13.6mm | |
| Standards/Approvals | IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | |
| Series | ACNT-H79 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 6V | ||
Minimum Supply Voltage 3V | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
Isolation Type Optical | ||
Minimum Operating Temperature -40°C | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Vos - Input Offset Voltage -2 → 2 mV | ||
Isolation Voltage 7500Vrms | ||
Maximum Operating Temperature 105°C | ||
Height 3.4mm | ||
Length 13.6mm | ||
Standards/Approvals IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | ||
Series ACNT-H79 | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts