Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- RS-stocknr.:
- 178-3179
- Fabrikantnummer:
- ACPL-782T-000E
- Fabrikant:
- Broadcom
Subtotaal (1 tube van 50 eenheden)*
€ 349,20
(excl. BTW)
€ 422,55
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 50 + | € 6,984 | € 349,20 |
*prijsindicatie
- RS-stocknr.:
- 178-3179
- Fabrikantnummer:
- ACPL-782T-000E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Isolation Type | Reinforced | |
| Minimum Operating Temperature | -40°C | |
| Isolation Voltage | 3750Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Maximum Operating Temperature | 125°C | |
| Series | ACPL-782T | |
| Standards/Approvals | UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2) | |
| Width | 7.62 mm | |
| Length | 9.8mm | |
| Height | 1.78mm | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 0.3 mV | ||
Isolation Type Reinforced | ||
Minimum Operating Temperature -40°C | ||
Isolation Voltage 3750Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Maximum Operating Temperature 125°C | ||
Series ACPL-782T | ||
Standards/Approvals UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2) | ||
Width 7.62 mm | ||
Length 9.8mm | ||
Height 1.78mm | ||
Automotive Standard AEC-Q100 | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Gerelateerde Links
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- ACPL-782T-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 2-Channel Isolation Amplifier, 8-Pin 5.5 V SSOP
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V SOIC
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V SSOP
- Broadcom 1-Channel Miniature Isolation Amplifier, 8-Pin 5.5 V SSOP
- HCPL-7800A-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8