HCPL-7800A-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- RS-stocknr.:
- 450-903
- Fabrikantnummer:
- HCPL-7800A-300E
- Fabrikant:
- Broadcom
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 13,16
(excl. BTW)
€ 15,92
(incl. BTW)
Voeg 6 eenheden toe voor gratis bezorging
Op voorraad
- 6 stuk(s) klaar voor verzending
- 180 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 13,16 |
| 10 - 24 | € 12,09 |
| 25 + | € 11,35 |
*prijsindicatie
- RS-stocknr.:
- 450-903
- Fabrikantnummer:
- HCPL-7800A-300E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Minimum Operating Temperature | -40°C | |
| Isolation Voltage | 3750Vrms | |
| Isolation Type | Optical | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Maximum Operating Temperature | 100°C | |
| Series | HCPL-7800A | |
| Height | 1.78mm | |
| Standards/Approvals | CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | |
| Width | 7.62 mm | |
| Length | 9.8mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 0.3 mV | ||
Minimum Operating Temperature -40°C | ||
Isolation Voltage 3750Vrms | ||
Isolation Type Optical | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Maximum Operating Temperature 100°C | ||
Series HCPL-7800A | ||
Height 1.78mm | ||
Standards/Approvals CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | ||
Width 7.62 mm | ||
Length 9.8mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Gerelateerde Links
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- HCPL-7800A-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- HCPL-7800A-500E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7800-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7510-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- HCPL-7840-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP