Onlangs gezocht

    Megger MIT410 2, Insulation Tester, 1000V, 200GΩ, CAT IV UKAS Calibration

    RS-stocknr.:
    921-8727
    Fabrikantnummer:
    1006-337
    Fabrikant:
    Megger
    Megger
    calukas_ll_be02.gif
    Bekijk alle Insulation Testers
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 08/09/2022, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    747,00 €

    (excl. BTW)

    903,87 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +747,00 €
    RS-stocknr.:
    921-8727
    Fabrikantnummer:
    1006-337
    Fabrikant:
    Megger
    Land van herkomst:
    GB

    Datasheets


    Wetgeving en conformiteit

    Land van herkomst:
    GB

    Productomschrijving

    Megger Insulation and Continuity Testers


    The Megger MIT410/2 200Gohm insulation and continuity testers have a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry-standard 10-20%. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application-specific test voltages are required that do not appear in the standard ranges.
    Supplied with
    Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries


    Features and Benefits


    Insulation testing up to 1000V
    Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage
    Stabilised insulation test voltage (New)
    Single range, faster continuity testing from 0.01ohm to 1Mohm (New)
    600V TRMS AC and DC voltage measurement
    Live circuit detection and protection
    User variable insulation test voltage from 100V to 1000V (New) depending on model
    Test result storage and Bluetooth® downloading depending on model
    Rechargeable options for mains and car charging (New) depending on model


    Applications


    Industrial
    Cable Testing
    Motor Testing
    Automotive
    ESD
    Panel Building
    Avionics
    Maintenance


    Certifications


    CAT IV 600 V
    IP54 rated



    Specificaties

    KenmerkWaarde
    Tester TypeInsulation Tester
    Minimum Test Voltage10V
    Maximum Test Voltage1000V
    Maximum Insulation Resistance Measurement200GΩ
    Display TypeAnalogue, Dual Digital
    CalibratedUKAS
    Test Current205mA
    Battery Life2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
    Minimum Operating Temperature-20°C
    Maximum Operating Temperature+55°C
    Power SourceBattery
    Safety Category LevelCAT IV
    Safety Category Voltage600V
    Safety CategoryCAT IV 600V
    Weight775g
    Dimensions92 x 50 x 220mm
    Length92mm
    Width50mm
    Battery TypeAlkaline
    Model Number pMIT410 2
    Height220mm
    Tijdelijk niet op voorraad nieuwe voorraad verwacht op 08/09/2022, met een levertijd van 1 werkdag.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    747,00 €

    (excl. BTW)

    903,87 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +747,00 €