Onlangs gezocht

    Megger MIT400 2, Insulation Tester, 1000V, 200GΩ, CAT IV UKAS Calibration

    RS-stocknr.:
    921-8695
    Fabrikantnummer:
    1006-336
    Fabrikant:
    Megger
    Megger
    calukas_ll_be02.gif
    Bekijk alle Insulation Testers
    16 op voorraad - levertijd is 3 à 5 werkdagen . Gekalibreerde producten kunnen niet worden geretourneerd.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    646,00 €

    (excl. BTW)

    781,66 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +646,00 €
    RS-stocknr.:
    921-8695
    Fabrikantnummer:
    1006-336
    Fabrikant:
    Megger
    Land van herkomst:
    GB

    Datasheets


    Wetgeving en conformiteit

    Land van herkomst:
    GB

    Productomschrijving

    Megger MIT 400 mk2 Series Insulation & Continuity Testers


    Meggers MIT400/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.

    All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
    Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.

    Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.


    Stabilised insulation test voltage
    600 V TRMS AC and DC voltage measurement
    Live circuit detection and protection
    CAT IV 600 V & IP54
    Weatherproof, rated to IP54
    Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)


    Standards

    IEC1010, HD384 and BS EN 61557

    Supplied with

    Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, information CD and 6 x AA Alkaline Batteries

    Megger Insulation and Continuity Testers


    The Megger MIT400/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed on the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50V to 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges.


    Features and Benefits


    Insulation testing up to 1000V and 200Gohm range
    Stabilised insulation test voltage (New)
    Single range, faster continuity testing from 0.01ohm to 1Mohm (New)
    600V TRMS AC and DC voltage measurement
    Live circuit detection and protection
    User variable insulation test voltage from 100V to 1000V (New) depending on model
    Test result storage and Bluetooth downloading depending on model
    Rechargeable options for mains and car charging (New) depending on the mode


    Applications


    Industrial sites
    Cable testing
    Motor testing
    Automotive
    ESD
    Panel building
    Avionics
    Maintenance activities


    Certifications


    CAT IV 600V
    IP54 rated



    Specificaties

    KenmerkWaarde
    Tester TypeInsulation Tester
    Minimum Test Voltage10V
    Maximum Test Voltage1000V
    Maximum Insulation Resistance Measurement200GΩ
    Display TypeAnalogue, Dual Digital
    CalibratedUKAS
    Test Current205mA
    Battery Life2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
    Minimum Operating Temperature-20°C
    Maximum Operating Temperature+55°C
    Power SourceBattery
    Safety Category LevelCAT IV
    Safety Category Voltage600V
    Safety CategoryCAT IV 600V
    Height220mm
    Model Number pMIT400 2
    Weight775g
    Length92mm
    Width50mm
    Dimensions92 x 50 x 220mm
    Battery TypeAlkaline
    16 op voorraad - levertijd is 3 à 5 werkdagen . Gekalibreerde producten kunnen niet worden geretourneerd.
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    646,00 €

    (excl. BTW)

    781,66 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +646,00 €