4D Systems microCAM-III uCAM-III Image Sensor, 1fps, 5-Pin
- RS-stocknr.:
- 175-7755
- Fabrikantnummer:
- uCAM-III
- Fabrikant:
- 4D Systems
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 51,09
(excl. BTW)
€ 61,82
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 1 stuk(s) klaar voor verzending
- 55 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 51,09 |
| 5 - 9 | € 49,76 |
| 10 + | € 48,53 |
*prijsindicatie
- RS-stocknr.:
- 175-7755
- Fabrikantnummer:
- uCAM-III
- Fabrikant:
- 4D Systems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | 4D Systems | |
| Series | microCAM-III | |
| Frame Rate | 1fps | |
| Mounting Type | Through Hole | |
| Pin Count | 5 | |
| Dimensions | 32 x 32 x 15.6mm | |
| Length | 32mm | |
| Width | 32mm | |
| Height | 15.6mm | |
| Maximum Operating Supply Voltage | 9 V | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Supply Voltage | 4.5 V | |
| Minimum Operating Temperature | -30 °C | |
| Alles selecteren | ||
|---|---|---|
Merk 4D Systems | ||
Series microCAM-III | ||
Frame Rate 1fps | ||
Mounting Type Through Hole | ||
Pin Count 5 | ||
Dimensions 32 x 32 x 15.6mm | ||
Length 32mm | ||
Width 32mm | ||
Height 15.6mm | ||
Maximum Operating Supply Voltage 9 V | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Supply Voltage 4.5 V | ||
Minimum Operating Temperature -30 °C | ||
- Land van herkomst:
- CN
4D Systems serial camera module
The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.
Features and Benefits
• 5VDC nominal supply
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images