Transcend M.2 2 TB Internal SSD

This SSD provides high-capacity, internal storage for industrial and professional systems, designed for Compact M.2 slots and demanding thermal environments. It connects via a SATA III 6Gb/s Interface and delivers flash-based persistent storage for automation, electronics and mechanical control platforms where endurance and secure data handling are required.

• 2TB capacity for extended data retention and logs
• 256-bit AES encryption protecting stored information
• 3D NAND structure improving endurance and density
• Rated to operate up to 75°C for hot-location use
• Industrial-grade construction for continuous operation
• UKCA approval supporting regional regulatory acceptance

• Suitable for embedded automation controllers collecting process data
• Ideal for industrial PCs in factory-floor equipment
• Used with data-logging units that require encrypted storage
• Can be used for firmware repositories in test rigs
• Used for backup media in electrical test benches

It uses an M.2 form factor with an 80mm board length and a 22mm width for common M.2 2280 slots.

The drive is rated to function down to −20°C, allowing reliable operation during low-temperature system start-ups.

It is designed as an internal solid-state drive to be mounted directly onto a host M.2 connector.

The device uses 3D NAND memory architecture to provide dense storage while maintaining endurance characteristics.