McLennan Servo Supplies Spur Gearbox, 125:1 Gear Ratio, 5 Nm Maximum Torque
- RS-stocknr.:
- 718-903
- Fabrikantnummer:
- MRIG23 (125:1)
- Fabrikant:
- McLennan Servo Supplies
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 145,68
(excl. BTW)
€ 176,27
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 02 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 145,68 |
*prijsindicatie
- RS-stocknr.:
- 718-903
- Fabrikantnummer:
- MRIG23 (125:1)
- Fabrikant:
- McLennan Servo Supplies
Specificaties
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | McLennan Servo Supplies | |
| Gear Ratio | 125:1 | |
| Gearbox Type | Spur | |
| Maximum Output Torque | 5 Nm | |
| Overall Width | 56mm | |
| Overall Depth | 41mm | |
| Alles selecteren | ||
|---|---|---|
Merk McLennan Servo Supplies | ||
Gear Ratio 125:1 | ||
Gearbox Type Spur | ||
Maximum Output Torque 5 Nm | ||
Overall Width 56mm | ||
Overall Depth 41mm | ||
Adaptable Gearboxes 4Nm
A range of high quality steel geared gearboxes with the following features:
Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters
Gerelateerde Links
- McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 0.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 30:1 Gear Ratio, 0.3 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 5:1 Gear Ratio, 1.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 50:1 Gear Ratio, 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 500:1 Gear Ratio, 7 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 25:2 Gear Ratio, 2.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 250:1 Gear Ratio, 6 Nm Maximum Torque