Semikron Danfoss Skyper 42 R MOSFET Gate Driver 2, 30 A 15.6 V
- RS-stocknr.:
- 905-6175
- Fabrikantnummer:
- Skyper 42 R
- Fabrikant:
- Semikron Danfoss
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 222,80
(excl. BTW)
€ 269,59
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 18 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 1 | € 222,80 |
| 2 - 4 | € 213,66 |
| 5 - 9 | € 208,09 |
| 10 - 19 | € 199,85 |
| 20 + | € 194,95 |
*prijsindicatie
- RS-stocknr.:
- 905-6175
- Fabrikantnummer:
- Skyper 42 R
- Fabrikant:
- Semikron Danfoss
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Semikron Danfoss | |
| Product Type | MOSFET | |
| Output Current | 30A | |
| Fall Time | 1.1μs | |
| Number of Outputs | 2 | |
| Driver Type | MOSFET | |
| Rise Time | 1.1μs | |
| Minimum Supply Voltage | 15.6V | |
| Number of Drivers | 2 | |
| Maximum Supply Voltage | 15.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 80 mm | |
| Height | 19mm | |
| Standards/Approvals | No | |
| Length | 69mm | |
| Mount Type | Through Hole | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Semikron Danfoss | ||
Product Type MOSFET | ||
Output Current 30A | ||
Fall Time 1.1μs | ||
Number of Outputs 2 | ||
Driver Type MOSFET | ||
Rise Time 1.1μs | ||
Minimum Supply Voltage 15.6V | ||
Number of Drivers 2 | ||
Maximum Supply Voltage 15.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 80 mm | ||
Height 19mm | ||
Standards/Approvals No | ||
Length 69mm | ||
Mount Type Through Hole | ||
Automotive Standard No | ||
- Land van herkomst:
- DE
SKYPER® IGBT Driver Core Module
The SKYPER 42 R IGBT driver core constitutes an interface between IGBT modules and the controller. This core is a half-bridge driver with the basic functions built-in for driving, potential separation and protection. The SKYPER 42 R was developed for systems in the power range of 1 to 8 MVA.
When using Semikron IGBT driver cores an adapter board (RS 905-6059) is required between the IGBT module and the gate driver core.
Two output channels
Up to 50μC (micro Coulomb) gate charge
Integrated potential-free power supply
Short Pulse Suppression (SPS)
Under Voltage Protection (UVP)
Drive interlock (dead time) top / bottom (DT)
Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct switch-off
Shut Down Input (SDI)
Failure Management
Expandable by External Boost Capacitors (BC)
DC bus voltage up to 1200V
SKYPER 42 R can be plugged or soldered on the SKYPER® IGBT adaptor board
MOSFET & IGBT Drivers, Semikron
Gerelateerde Links
- Semikron Danfoss Board 1 SKYPER 32 R MOSFET Gate Driver 2, 15 A, 15.6V, SKYPER
- Semikron Danfoss Board 1 SKYPER 32PRO R MOSFET Gate Driver 2, 15 A, 15.6V, SKYPER
- Semikron Danfoss SKYPER 32 R MOSFET Gate Driver 2, 15 A, 15.6V
- Semikron SKYPER 32 PRO R MOSFET Gate Driver 2, 15 A, 15.6V
- Semikron Danfoss SKHI 22A H4 R MOSFET Gate Driver 2, 8 A, 15.6V
- Semikron Danfoss SKYPER IGBT
- Semikron Danfoss SKYPER 12 press-fit C 600A Gate Driver, 15 A, 15V
- Semikron Danfoss SKHI 22B H4 R MOSFET Gate Driver 2, 8 A, 18V