Microchip, Dual 2, 1.5 A 8-Pin 18V, SOIC
- RS-stocknr.:
- 649-473P
- Fabrikantnummer:
- TC4426COA713
- Fabrikant:
- Microchip
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 64,00
(excl. BTW)
€ 77,50
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 1.595 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 245 | € 1,28 |
| 250 - 495 | € 1,15 |
| 500 + | € 0,916 |
*prijsindicatie
- RS-stocknr.:
- 649-473P
- Fabrikantnummer:
- TC4426COA713
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Gate Driver | |
| Output Current | 1.5A | |
| Pin Count | 8 | |
| Fall Time | 25ns | |
| Package Type | SOIC | |
| Driver Type | Dual | |
| Rise Time | 35ns | |
| Minimum Supply Voltage | 18V | |
| Number of Drivers | 2 | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | TC442 | |
| Standards/Approvals | AEC-Q100 | |
| Length | 6mm | |
| Height | 0.85mm | |
| Mount Type | Through Hole, Surface | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Gate Driver | ||
Output Current 1.5A | ||
Pin Count 8 | ||
Fall Time 25ns | ||
Package Type SOIC | ||
Driver Type Dual | ||
Rise Time 35ns | ||
Minimum Supply Voltage 18V | ||
Number of Drivers 2 | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series TC442 | ||
Standards/Approvals AEC-Q100 | ||
Length 6mm | ||
Height 0.85mm | ||
Mount Type Through Hole, Surface | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- TH
The Microchip Dual high-speed power MOSFET driver devices exhibit high latch-up resistance under all conditions within their specified power and voltage ratings, withstanding noise spikes up to 5 volts of either polarity on the ground pin without damage, and tolerating up to 500 mill amperes of reverse current in either direction through their outputs without logic upset or harm, while all terminals are fully protected against electrostatic discharge up to 2 kilovolts.
Low output impedance of 7Ω typical
Latch-up protected to withstand 0.5A reverse current
Input withstands negative voltages up to 5V
Electrostatic discharge (ESD) protected up to 2 kV
Gerelateerde Links
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,