Schurter 20A Panel Mount Fuse Holder for 6.3 x 32mm Fuse, 250V ac

Bekijk alle Fuse Holders
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 12,51

(excl. BTW)

€ 15,135

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 15 stuk(s) klaar voor verzending
  • 425 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 20€ 2,502€ 12,51
25 - 45€ 2,364€ 11,82
50 +€ 2,304€ 11,52

*prijsindicatie

RS-stocknr.:
197-9519
Fabrikantnummer:
0031.1672
Fabrikant:
Schurter
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Schurter

Fuse Size

6.3 x 32mm

Current Rating

20A

Voltage Rating

250V ac

Compatible Fuse Length

32mm

Series

FEU

Cap Style

Slotted

Compatible Fuse Diameter

6.3mm

Contact Material

Tin Plated Copper Alloy

International Protection Rating

IP40

Protection Category

PC2

'SCHURTER' Bayonet Cap, Dual Standard


Fully inaccessible as defined in BS EN 60127-6
Thermoplastic Body

Approvals

VDE, SEV, SEMKO, UL, CSA,

Schurter FEU Series Slotted Panel Mount Fuse Holders


The Schurter FEU series 20A panel mount fuse holder offers current and voltage ratings of 20A and 250VAC respectively. This makes it ideal to use in harsh environments. The body of this holder is made of thermoplastic material and tin plated copper alloy is used for contact. It has captive type fuse carrier.

Features and Benefits


• Compatible fuse dimension is 6.3mmx32mm
• Low profile fuse holder with insulation walls
• Protection against electric shock
• Quick connect terminal type of 6.3mmx0.8mm

Applications


• Appliances in unattended use
• General circuit protection
• Vehicle electrical circuits

Certifications


• CSA certified
• IEC529 certified
• IP40 rated
• SEMKO approved
• SEV approved
• UL 4248-1 approved


Panel Mounting


CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Gerelateerde Links