Huco Friction Clutch, 6mm Bore 53Ncm
- RS-stocknr.:
- 890-3036
- Fabrikantnummer:
- 271P25.22.RS
- Fabrikant:
- Huco
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 34,38
(excl. BTW)
€ 41,60
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 11 stuk(s) vanaf 08 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 34,38 |
| 5 - 9 | € 32,97 |
| 10 + | € 32,32 |
*prijsindicatie
- RS-stocknr.:
- 890-3036
- Fabrikantnummer:
- 271P25.22.RS
- Fabrikant:
- Huco
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Huco | |
| Bore | 6mm | |
| Torque Rating | 53Ncm | |
| Body Diameter | 25.8mm | |
| Alles selecteren | ||
|---|---|---|
Merk Huco | ||
Bore 6mm | ||
Torque Rating 53Ncm | ||
Body Diameter 25.8mm | ||
- Land van herkomst:
- GB
Basic 2 Plate Adjustable Friction Clutches with Set Screw & Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
