Gems Sensors RFO Series RotorFlow Electronic Flow Sensor for Liquid, 0.1 gal/min Min, 5 gal/min Max

Bekijk alle Flow Sensors

Subtotaal (1 eenheid)*

€ 161,41

(excl. BTW)

€ 195,31

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 16 stuk(s) vanaf 08 december 2025
  • Plus verzending 95 stuk(s) vanaf 08 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 161,41

*prijsindicatie

RS-stocknr.:
907-3953
Artikelnummer Distrelec:
137-59-547
Fabrikantnummer:
155421
Fabrikant:
Gems Sensors
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Gems Sensors

Media Monitored

Liquid

Device Type

RotorFlow Electronic

Minimum Flow Rate

0.1 gal/min

Maximum Flow Rate

5 gal/min

Supply Voltage

4.5 → 24 V dc

Pipe Diameter Range

1/4 in

Connection Type

1/4 NPT Female

Maximum Pressure

6.9bar

Material

Ploypropylene

Maximum Media Temperature

+21°C

Minimum Operating Temperature

-29°C

Maximum Operating Temperature

+82°C

Series

RFO

Current Rating

8 mA

Gems Sensors Flow Sensor


The Gems Sensors RFO series rotor flow electronic sensor sense a liquid flow rate of 0.5gal/min to 5gal/min. The sensors popularised the rotor flow paddle wheel design by combining high visibility rotors with solid-state electronics packaged into a compact, panel mount housings. It provides an accurate flow rate output with an integral visual confirmation and an unprecedented price/ performance ratio. The output signal for RFO is an on/off the pulse of the DC voltage supplied to the unit, it is compatible with all digital logic families. The frequency of the output pulse is proportional to the flow rate and ranges from approximately 15Hz to 180Hz.

Features and Benefits


Pipe diameter range is 1/4in
Accurate flow rate indication with integral visual confirmation
It is available in polypropylene body material
The pulsed output is 4.5VDC to 24VDC
Connection type is 1/4 NPT female
Maximum operating pressure is 6.9bar
Maximum operating temperature is 80°C

Applications


Visual flow confirmation on heat exchangers
Plastic injection moulding equipment

Certifications


CE certified
cRUus certified

Gerelateerde Links