Onlangs gezocht

    Cynergy3 RSF50 Series Vertical Polypropylene Float Switch, Float, 1m Cable, NO/NC

    RS-stocknr.:
    756-4267
    Fabrikantnummer:
    RSF58H100J1/8
    Fabrikant:
    Cynergy3
    Cynergy3
    Bekijk alle Float Switches
    12 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    42,84 €

    (excl. BTW)

    51,84 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 442,84 €
    5 - 941,51 €
    10 +40,27 €
    RS-stocknr.:
    756-4267
    Fabrikantnummer:
    RSF58H100J1/8
    Fabrikant:
    Cynergy3
    Land van herkomst:
    GB

    Wetgeving en conformiteit

    Land van herkomst:
    GB

    Productomschrijving

    Cynergy3 RSF50 Series Float Switches


    Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.
    There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.
    The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.


    Within the series there are 5 ranges:
    RSF53 (black) - Nylon
    RSF54 (opaque) - Polypropylene (WRAS approved)
    RSF56 (grey) - Polyphenylene Sulphide (PPS)
    RSF57 (green) - Polyvinylidene Fluoride (PVDF)
    RSF58 (white) - Polypropylene (UL approved)
    Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

    What contact types are there?
    The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

    What mounting thread does it have?
    RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.


    Note

    Part numbers ending in '1/8' have a 1/8"NPT mounting thread
    Part numbers ending in 'C' have an M12 mounting thread

    Warning

    The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

    Supplied with

    epoxy sealed leadouts


    Specificaties

    KenmerkWaarde
    Device TypeFloat
    Mounting TypeVertical
    Switch OutputNO/NC
    Body MaterialPolypropylene
    Cable Length1m
    Minimum Operating Temperature-20°C
    Maximum Operating Temperature+120°C
    Maximum Current1 A
    Gasket MaterialNitrile
    SeriesRSF50
    12 op voorraad - levertijd is 1 werkdag(en).
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    42,84 €

    (excl. BTW)

    51,84 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 442,84 €
    5 - 941,51 €
    10 +40,27 €