Festo MS Filter Regulator, 40 μm, G3/8 in, Manual, 20 bar, 8232907

RS-stocknr.:: 793-238
Fabrikantnummer:: MS6-LFR-3/8-D7-E-R-M-VS
Fabrikant:: Festo

Festo MS Filter Regulator, 40 μm, G3/8 in, Manual, 20 bar, 8232907

Subtotaal (1 eenheid)*

€ 74,03

(excl. BTW)

€ 89,58

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 23 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 74,03

*prijsindicatie

RS-stocknr.:: 793-238
Fabrikantnummer:: MS6-LFR-3/8-D7-E-R-M-VS
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Filter Regulator
	Port Size	G3/8 in
	Maximum Operating Pressure	20 bar
	Maximum Flow Rate	4000L/min
	Connection Thread Standard	G
	Series	MS
	Drain Type	Manual
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Overall Width	62mm
	Standards/Approvals	ISO 8573-1:2010
	Model Number	8232907
	Bowl Material	Polycarbonate
	Pressure Setting Range	0.5 → 12 bar
	Pressure Gauge Port Thread Standard	G

	Alles selecteren
	Merk Festo
	Product Type Filter Regulator
	Port Size G3/8 in
	Maximum Operating Pressure 20 bar
	Maximum Flow Rate 4000L/min
	Connection Thread Standard G
	Series MS
	Drain Type Manual
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Overall Width 62mm
	Standards/Approvals ISO 8573-1:2010
	Model Number 8232907
	Bowl Material Polycarbonate
	Pressure Setting Range 0.5 → 12 bar
	Pressure Gauge Port Thread Standard G

Land van herkomst:: HU

Festo Series MS Filter Regulator, 0.50 to 12 bar Pressure Setting Range, 40μm Filtration Size - MS6-LFR-3/8-D7-E-R-M-VS, Numeric Part Number: 8232907

This filter regulator provides regulated compressed Air with integrated particulate removal for pneumatic systems. Designed for in-line or front-panel installation, it offers consistent output pressure and secondary exhaust capability while handling compressed Air and inert gases to the specified purity class. The unit operates within typical workshop temperature ranges and is suitable where moderate corrosion resistance and food-contact suitability (per supplementary material notes) are required.

Features and Benefits:

• 0.5 to 12 bar regulation range ensures controlled downstream pressure
• 4000 L/min nominal flow supports high-flow pneumatic demands
• 40μm filtration delivers particle removal with greater than 75% condensate separation
• Polycarbonate bowl with plastic guard allows visible condensate monitoring
• Manual rotating drain enables simple condensate evacuation

Applications

• Suitable for general compressed-air distribution lines
• Ideal for feeding pneumatic actuators and valves
• Used with inert gas supply systems requiring regulated pressure
• Can be used in food-sector installations following material notes
• Suitable for plant areas with moderate corrosion exposure

What port sizes are provided for pipe connections?

Both inlet and outlet pneumatic connections use G3/8 thread.

How is the condensate removed from the bowl?

The condensate is expelled via a manually operated, rotating drain.

What materials are used for the fluid-contact components?

The housing is die-cast aluminium, the bowl is Makrolon® polycarbonate, Seals and membrane are NBR, and internal plates use POM.

What pressure and temperature limits apply during operation?

The unit accepts up to 20 bar maximum operating pressure and operates between -10°C and 60°C.

How does the unit perform regarding flow and hysteresis?

It provides a standardised flow rate of 4000 L/min and a maximum pressure hysteresis of 0.25 bar.