Festo MS Filter Regulator, 40 μm, G1 in, Automatic, 12 bar, 8232924

RS-stocknr.:: 793-146
Fabrikantnummer:: MS6-LFR-AGF-D7-E-R-V
Fabrikant:: Festo

Festo MS Filter Regulator, 40 μm, G1 in, Automatic, 12 bar, 8232924

Subtotaal (1 eenheid)*

€ 154,22

(excl. BTW)

€ 186,61

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 23 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 154,22

*prijsindicatie

RS-stocknr.:: 793-146
Fabrikantnummer:: MS6-LFR-AGF-D7-E-R-V
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Filter Regulator
	Port Size	G1 in
	Maximum Flow Rate	4500L/min
	Maximum Operating Pressure	12 bar
	Connection Thread Standard	G
	Series	MS
	Drain Type	Automatic
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Overall Width	62mm
	Standards/Approvals	ISO 8573-1:2010
	Pressure Gauge Port Thread Standard	G
	Pressure Setting Range	0.5 → 12 bar
	Bowl Material	Polycarbonate
	Model Number	8232924

	Alles selecteren
	Merk Festo
	Product Type Filter Regulator
	Port Size G1 in
	Maximum Flow Rate 4500L/min
	Maximum Operating Pressure 12 bar
	Connection Thread Standard G
	Series MS
	Drain Type Automatic
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Overall Width 62mm
	Standards/Approvals ISO 8573-1:2010
	Pressure Gauge Port Thread Standard G
	Pressure Setting Range 0.5 → 12 bar
	Bowl Material Polycarbonate
	Model Number 8232924

Datasheet - MS6-LFR-AGF-D7-E-R-V

Land van herkomst:: HU

Festo Series MS Filter Regulator, 0.50 to 12 bar Pressure Setting Range, 40μm Filtration Size - MS6-LFR-AGF-D7-E-R-V, Numeric Part Number: 8232924

This filter regulator provides pressure conditioning and particulate removal for compressed Air and inert gases in industrial pneumatic systems. It combines pressure regulation with particulate separation and an integral gauge port thread to enable system monitoring. Designed for in-line or front-panel mounting, it operates across typical workshop temperatures and is compatible with compressed Air specified to ISO 8573-1:2010.

Features and Benefits:

• 4500 L/min flow rate delivers high-volume Air for large systems
• 0.5 to 12 bar regulation range supports broad pressure requirements
• Fully automatic condensate drain reduces manual maintenance
• Polycarbonate bowl with guard allows visible contaminant inspection
• 40μm filtration improves downstream component longevity

Applications

• Suitable for supply conditioning to pneumatic actuators
• Ideal for paint-spray preparation with particulate control
• Used with inert gas lines requiring regulated pressure
• Can be used for workshop Air mains delivering high flow
• Suitable for front-panel integration in control stations

What materials contact the medium inside the unit?

Seals and membrane are MADE from NBR while the bowl is Makrolon® and the internal separating plate is POM.

How should it be mounted for correct operation?

It may be installed in-line or mounted to a front panel and must be mounted vertical ±5° for intended drainage.

What temperatures can it withstand during storage and use?

The unit is rated for use and storage within a range of -10°C to 60°C.

Which gases is it compatible with?

It is suitable for compressed Air meeting ISO 8573-1:2010 and for inert gases.

What materials contribute to moderate corrosion resistance?

Die-cast aluminium housing and sub-base with CRC2 classification provide moderate corrosion stress resistance.