Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit

RS-stocknr.:: 123-6402
Artikelnummer Distrelec:: 300-76-090
Fabrikantnummer:: FI-500
Fabrikant:: Fluke Networks

Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit

Subtotaal (1 eenheid)*

€ 3.027,66

(excl. BTW)

€ 3.663,47

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Beperkte voorraad

5 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 3.027,66

*prijsindicatie

RS-stocknr.:: 123-6402
Artikelnummer Distrelec:: 300-76-090
Fabrikantnummer:: FI-500
Fabrikant:: Fluke Networks

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke Networks
	Product Type	Fibre Tester
	Cable Type	Single & Multimode
	Equipment Type	Fibre Optic Test Kit
	Connector Type	ST, LC, LC Port, FC Port, SC
	Resolution	1 μm
	Interface Type	USB
	Magnification	200
	Plug Type	3-Pin (Global)
	Battery Type	Nickel-Metal Hydride
	Battery Life	2h
	Length	72mm
	Height	140mm
	Width	44 mm
	Power Source	Mains, Battery
	Standards/Approvals	IEC
	Weight	230g
	Includes	Battery, Cord, Display, Adapter
	Maximum Operating Temperature	40°C
	Model Number	FI-500
	Minimum Operating Temperature	0°C

	Alles selecteren
	Merk Fluke Networks
	Product Type Fibre Tester
	Cable Type Single & Multimode
	Equipment Type Fibre Optic Test Kit
	Connector Type ST, LC, LC Port, FC Port, SC
	Resolution 1 μm
	Interface Type USB
	Magnification 200
	Plug Type 3-Pin (Global)
	Battery Type Nickel-Metal Hydride
	Battery Life 2h
	Length 72mm
	Height 140mm
	Width 44 mm
	Power Source Mains, Battery
	Standards/Approvals IEC
	Weight 230g
	Includes Battery, Cord, Display, Adapter
	Maximum Operating Temperature 40°C
	Model Number FI-500
	Minimum Operating Temperature 0°C

Land van herkomst:: LT

Fluke Networks Fibre Optic Test Equipment

The Fluke Networks FI-500 fibre optic test equipment helps in getting rid of the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations. This test equipment is designed to simplify the inspection process. It fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope along with advanced features to reduce troubleshooting and inspection time. It is supplied with a FiberInspector probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter.

Features and Benefits

Port Bright a built-in flashlight that illuminates dark areas and dense panels

Autofocus feature for stable images in few seconds

Large display to view single-mode and multimode fibre end faces

Includes 4 UPC tips (LC, SC, 1.25mm and 2.50mm)

The small-profile probe fits into tight spots and features push button controls for simple operation

APC tips available

3.2in TFT LCD display with resolution 320 x 240

Display magnification options are 1x, 2x, 4x

Display Fps is greater than or equal to 12

2 rechargeable NiMH batteries for display with rating 1.2V and 2700mAh

Power adapter input rating for display is 100VAC to 240VAC ±10% at 50/60Hz with output of 6VDC and 3A

Probe magnification with 200x zoom function has 1x, 2x and 4x settings

Probe 5MP camera with CMOS sensor

Probe field with view of 610μm x 460μm

Probe resolution is 1μm

Light source through LED has life greater than 100000 hours

Coaxial blue LED for end face Illumination

2 white LEDs for port Illumination

Power to probe is supplied through the USB interface

Probe video output through USB 2.0 interface

Applications

Measure and locate high loss splices

Measure and locate high loss connections and breaks

Locate the end of a fibre

Find potential sources of errors caused by reflectance from dirty or poor connections

Detect live optical signals before it begins testing

Certifications

IEC 61010-1

IEC 62133