Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

RS-stocknr.:: 178-2970
Fabrikantnummer:: SP000063855
Fabrikant:: Broadcom

Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

Subtotaal (125 eenheden, in een tube van 125)*

€ 1.432,25

(excl. BTW)

€ 1.733,00

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending 375 stuk(s) vanaf 19 oktober 2026
Plus verzending 375 stuk(s) vanaf 02 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tube*
125 +	€ 11,458	€ 1.432,25

*prijsindicatie

RS-stocknr.:: 178-2970
Fabrikantnummer:: SP000063855
Fabrikant:: Broadcom

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Broadcom
	Maximum Data Rate	5MBd
	Product Type	Fibre Optic Receiver
	Connector Shape	Round
	Wavelength of Peak Sensitivity	700nm
	Typical Rise Time	14ns
	Typical Fall Time	4ns
	Number of Pins	5
	Mount Type	Through Hole
	Connector Type	Push In Collet
	Width	9.2mm
	Length	24.2mm
	Height	9mm
	Standards/Approvals	No
	Output Signal Type	TTL
	Series	SFH

	Alles selecteren
	Merk Broadcom
	Maximum Data Rate 5MBd
	Product Type Fibre Optic Receiver
	Connector Shape Round
	Wavelength of Peak Sensitivity 700nm
	Typical Rise Time 14ns
	Typical Fall Time 4ns
	Number of Pins 5
	Mount Type Through Hole
	Connector Type Push In Collet
	Width 9.2mm
	Length 24.2mm
	Height 9mm
	Standards/Approvals No
	Output Signal Type TTL
	Series SFH

Datasheet

Broadcom SFH Series Fibre Optic Receiver, 24.2mm Length, 5 Pins - SP000063855

This Fibre optic receiver converts optical signals into TTL electrical outputs for use in electronic assemblies. It is intended for through-hole mounting and is suitable where a Compact optical-to-digital Interface is required. The device is optimised for operation around a visible near-red Wavelength and supports moderate data-rate transmission for control and detection tasks.

Features and Benefits:

• TTL output simplifies direct digital interfacing
• Peak sensitivity at 700nm for near-red detection
• Typical rise time 14ns for Rapid signal acquisition
• Typical fall time 4ns for fast signal clearance
• Maximum data rate 5MBd for moderate-speed links
• Five-pin configuration enables straightforward connectivity

Applications

• Suitable for inline optical-to-digital sensor modules
• Ideal for control signalling in automation systems
• Used with optical transmitters operating near 700nm
• Can be used for short-range serial optical links
• Suitable for PCB-mounted detection in equipment panels

What mounting method does it require?

It is designed for through-hole mounting to secure it to a PCB.

How is the optical Fibre attached?

A round connector with a push-in collet secures the Fibre end for alignment.

How many electrical connections are provided?

The device uses a five-pin electrical Interface for power and signal lines.

What output logic level should the receiving circuit expect?

The detector produces a TTL-compatible digital output signal.

Which physical profile may assist low-height installations?

The receiver presents a low-profile height suitable for constrained vertical spaces.