220-42779J, 64 Way Double Sided DIN 41612 Extender Board Extender Board FR4
- RS-stocknr.:
- 502-168
- Fabrikantnummer:
- 220-42779J
- Fabrikant:
- Vero Technologies
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 502-168
- Fabrikantnummer:
- 220-42779J
- Fabrikant:
- Vero Technologies
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Vero Technologies | |
| Type | Extender Board | |
| Connection | DIN 41612 | |
| Number of Contacts | 64 | |
| Base Material | Epoxy Glass Fabric Laminate | |
| Number of Sides | 2 | |
| FR Material Grade | FR4 | |
| Thickness | 1.6mm | |
| Width | 160 mm, 220mm | |
| Alles selecteren | ||
|---|---|---|
Merk Vero Technologies | ||
Type Extender Board | ||
Connection DIN 41612 | ||
Number of Contacts 64 | ||
Base Material Epoxy Glass Fabric Laminate | ||
Number of Sides 2 | ||
FR Material Grade FR4 | ||
Thickness 1.6mm | ||
Width 160 mm, 220mm | ||
Niet conform
- Land van herkomst:
- GB
Width Adaptable Extender Board (PTH)
Double sided pth glass fibre extender boards for use with both 160mm and 220mm deep Eurocards in 64-way or 96-way DIN 41612 connector options.
Plug link facility for disconnection of each line allows voltage/logic status checks etc.
Plug links arranged in rows of 32
Fitted at each end with DIN41612 indirect edge connectors
64-way fitted with connector for logic analyser or bus termination (provision for one on 96-way)
Plug links arranged in rows of 32
Fitted at each end with DIN41612 indirect edge connectors
64-way fitted with connector for logic analyser or bus termination (provision for one on 96-way)
Note
By using additional extender boards and optional spacer kit, extenders may be constructed for 6U, 9U, 12U widths etc.
Supplied with
2 support arms/ejectors
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.