Microchip, 28-Pin, Stand-Alone Ethernet Controller, 3.1 V SPI 3.6V ENC28J60-I/SP, SPI
- RS-stocknr.:
- 698-8981P
- Fabrikantnummer:
- ENC28J60-I/SP
- Fabrikant:
- Microchip
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 698-8981P
- Fabrikantnummer:
- ENC28J60-I/SP
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Stand-Alone Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | SPI | |
| Interface Type | SPI | |
| Standard Supported | IEEE 802.3 | |
| Number of Ports | 1 | |
| Mount Type | Through Hole | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 5.02mm | |
| Minimum Supply Voltage | 3.1V | |
| Length | 35.5mm | |
| Width | 7.4mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Stand-Alone Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode SPI | ||
Interface Type SPI | ||
Standard Supported IEEE 802.3 | ||
Number of Ports 1 | ||
Mount Type Through Hole | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 5.02mm | ||
Minimum Supply Voltage 3.1V | ||
Length 35.5mm | ||
Width 7.4mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for Faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
Gerelateerde Links
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Festo Natural Round Plastic Tube x 4mm OD x 2.6mm ID x 1.4mm
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts