Microchip, 48-Pin LQFP, Ethernet Transceiver, 3.3 V 100 Mbps 3.3V KSZ8081MLXIA-TR
- RS-stocknr.:
- 235-4638P
- Fabrikantnummer:
- KSZ8081MLXIA-TR
- Fabrikant:
- Microchip
Subtotaal 5 eenheden (geleverd op een doorlopende strip)*
€ 7,58
(excl. BTW)
€ 9,17
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 940 stuk(s) vanaf 17 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 + | € 1,516 |
*prijsindicatie
- RS-stocknr.:
- 235-4638P
- Fabrikantnummer:
- KSZ8081MLXIA-TR
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Transceiver | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Transceiver | |
| Standard Supported | IEEE 802.3 | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Length | 7.1mm | |
| Minimum Supply Voltage | 3.3V | |
| Standards/Approvals | No | |
| Height | 1.6mm | |
| Automotive Standard | No | |
| Supply Current | 47mA | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Transceiver | ||
Maximum Data Rate 100Mbps | ||
Sub Type Transceiver | ||
Standard Supported IEEE 802.3 | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Length 7.1mm | ||
Minimum Supply Voltage 3.3V | ||
Standards/Approvals No | ||
Height 1.6mm | ||
Automotive Standard No | ||
Supply Current 47mA | ||
The Microchip KSZ8081 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O Interface support.
Single-chip 10BASE-T/100BASE-TX IEEE 802.3 compliant Ethernet transceiver
MII Interface support
HBM ESD rating
Built-in 1.2V regulator for core
Gerelateerde Links
- RS PRO 4 Way Male 4 Pin Molex to 4 Way Female 4 Pin Molex Wire to Board Cable, 2m
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- Pilz PNOZ X PNOZ X3 Emergency Stop Safety Relay, 24 V dc, 110V ac, Dual-Channel, 3 Safety Contacts
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series, Digital, Transistor Output, 14 (Digital, 2
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage Output, 19.2 → 300 V dc,
- Pilz PNOZ X PNOZ X1 Emergency Stop Safety Relay, 24V ac/dc, Single Channel, 3 Safety Contacts
- PR Electronics 4100 Series Universal Transmitter, Universal Input, Current, Voltage, Relay Output, 19.2 → 300 V
- Siemens LOGO! Series PLC CPU Starter Kit for Use with LOGO! V8.3, 115 V ac/dc, 230 V ac/dc Supply, Relay Output,