Microchip KSZ8851-16MLLI, Ethernet Controller, 3.3 V 100 Mbps BIU, 48-Pin 3.3 V LQFP
- RS-stocknr.:
- 177-3997
- Fabrikantnummer:
- KSZ8851-16MLLI
- Fabrikant:
- Microchip
Subtotaal (1 verpakking van 2 eenheden)*
€ 11,74
(excl. BTW)
€ 14,20
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 2 + | € 5,87 | € 11,74 |
*prijsindicatie
- RS-stocknr.:
- 177-3997
- Fabrikantnummer:
- KSZ8851-16MLLI
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Interface Type | BIU | |
| Standard Supported | IEEE 802.3u, IEEE | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Width | 7.1 mm | |
| Length | 7.1mm | |
| Height | 1.6mm | |
| Minimum Supply Voltage | 3.3V | |
| Supply Current | 85mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Interface Type BIU | ||
Standard Supported IEEE 802.3u, IEEE | ||
Mount Type Surface | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Width 7.1 mm | ||
Length 7.1mm | ||
Height 1.6mm | ||
Minimum Supply Voltage 3.3V | ||
Supply Current 85mA | ||
Automotive Standard No | ||
- Land van herkomst:
- US
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.
Integrated MAC and PHY Ethernet Controller
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Gerelateerde Links
- Microchip KSZ8851-16MLLI, Ethernet Controller, 100Mbps 100BaseTX, 10BaseT, BIU, 3.3 V, 48-Pin LQFP
- Microchip LAN7500-ABZJ, Ethernet Controller, 1000Mbps 1000BaseT, 100BaseTX, 10BaseT, USB, 3.3 V, 56-Pin QFN
- Microchip LAN7500I-ABZJ, USB to Ethernet Controller, 1000Mbps 1000BaseT, 100BaseTX, 10BaseT, USB, 3.3 V, 56-Pin QFN
- Microchip KSZ8863FLLI, Ethernet Switch IC, 10/100Mbps, 3.3 V, 48-Pin LQFP
- WIZnet Inc W5100, Ethernet Controller, 100Mbps MII, SPI, 3.3 V, 80-Pin LQFP
- Microchip KSZ8873RLLI, Ethernet Switch IC, 10/100Mbps RMII, 3.3 V, 64-Pin LQFP
- Microchip KSZ8895MLXI, Ethernet Switch IC, 10/100Mbps MII, 3.3 V, 128-Pin LQFP
- Microchip KSZ8873MLLI, Ethernet Switch IC, 10/100Mbps MII, 3.3 V, 64-Pin LQFP