Microchip KSZ8041TL, Physical Layer Transceiver, 3.3 V 100 Mbps RMII, MII, SMII, 48-Pin 3.3 V TQFP

Subtotaal (1 tray van 250 eenheden)*

€ 684,25

(excl. BTW)

€ 828,00

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 500 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per tray*
250 +€ 2,737€ 684,25

*prijsindicatie

RS-stocknr.:
177-3527
Fabrikantnummer:
KSZ8041TL
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Physical Layer Transceiver

Maximum Data Rate

100Mbps

Sub Type

Transceiver

Communication Mode

MII, RMII, SMI

Interface Type

RMII, MII, SMII

Standard Supported

IEEE 802.3u

Mount Type

Surface Mount

Package Type

TQFP

Maximum Supply Voltage

3.3V

Pin Count

48

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Width

7.1 mm

Minimum Supply Voltage

3.3V

Standards/Approvals

RoHS

Height

1.6mm

Length

7.1mm

Automotive Standard

No

Supply Current

58.3mA

The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data.

Single-chip 10Base-T/100Base-TX physical layer solution

Low power

Power consumption of <180mW

Power down and power saving modes

Built-in 1.8V regulator for core

Single power supply (3.3V)

HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option

Robust operation over standard cables

MII Interface support (KSZ8041NL only)

RMII Interface Support

External 50MHz system clock (KSZ8041NL or KSZ8041TL/FTL)

25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)

SMII Interface Support

External 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)

Fiber support 100Base-FX (KSZ8041FTL only)

MIIM (MDC/MDIO) management bus to 6.25MHz for Rapid PHY register configuration

Interrupt pin option

Gerelateerde Links