Belden 1633PE, 500 m Cat5E Cable, Black Polyethylene Sheath

Bekijk alle Ethernet Cable

Subtotaal (1 rol van 500 meter)*

€ 521,77

(excl. BTW)

€ 631,34

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Rol(len)
Per rol
Per meter*
1 +€ 521,77€ 1,044

*prijsindicatie

RS-stocknr.:
631-661
Fabrikantnummer:
1633PE.00500
Fabrikant:
Belden
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Belden

Product Type

Cat5E Cable

Series

1633PE

Cable Length

500m

Jacket Colour

Black

Jacket Material

Polyethylene

Minimum Operating Temperature

30°C

Maximum Operating Temperature

60°C

Standards/Approvals

REACH, EU CE, IEC 60332-1-2, RoHS

Number of Cores

4

Conductor Material

Bare Copper

Voltage

72V

Outside Diameter

6.3mm

Land van herkomst:
HU

Belden 1633PE Series Thin Ethernet Cable, 500m Cable Length, Black Jacket - 1633PE.00500


This thin Ethernet cable serves wired data transmission in industrial and commercial installations where a slim profile and permanent routing are needed. It is a four-core Cat5e assembly with solid conductors and a protective polyethylene outer covering, intended for continuous runs in control panels, machine rooms and structured cabling racks.

Features and Benefits:


• Solid bare copper conductors deliver stable signal integrity under load
• Polyethylene jacket offers chemical resistance for industrial environments
• Black outer sheath aids discrete installation and cable identification
• Rated for operation between -30°C and 60°C for low-temperature environments
• 72V voltage rating suitable for many automation and control circuits

Applications


• Suitable for Ethernet links in factory automation networks
• Ideal for fixed data wiring inside control cabinets
• Used for structured cabling in electronics testing labs
• Can be used for permanent runs in machine-to-machine communications

What conductor construction is used and why does it matter?


The cable uses single solid bare copper conductors which reduce insertion loss and provide consistent impedance for permanently installed links.

How does the sheath material affect installation choices?


The polyethylene jacket gives abrasion and moisture resistance, making it appropriate where cables run through conduit or alongside machinery.

Is the cable suited to confined routing spaces?


Its thin-profile 6.3mm outside diameter eases routing through cable trays and tight conduits while maintaining four-core connectivity.

Which approvals does it hold that relate to safety testing?


It meets IEC 60332-1-2 fire performance and carries CE, RoHS and REACH recognitions relevant to material and emissions compliance.

Gerelateerde Links