RS PRO Enclosure Heater, 230V ac, 300W Output, 300W Input 182mm x 133 mm

Afbeelding representeert productcategorie

Bekijk alle Enclosure Heaters
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 109,79

(excl. BTW)

€ 132,85

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 20 stuk(s) vanaf 04 mei 2026
  • Plus verzending 12 stuk(s) vanaf 18 juni 2026
  • Plus verzending 12 stuk(s) vanaf 16 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
1 - 9€ 109,79
10 - 24€ 106,05
25 - 49€ 100,45
50 - 99€ 92,99
100 +€ 87,85

*prijsindicatie

RS-stocknr.:
754-5535
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Output Power

300W

Product Type

Enclosure Heater

Input Power

300W

Supply Voltage

230V ac

Depth

133mm

Width

182mm

IP Rating

IP20

Minimum Operating Temperature

-55°C

Insulated PTC

No

Ventilated fan

Yes

Maximum Operating Temperature

155°C

Standards/Approvals

RoHS

Frequency

60Hz

Nominal Current

1.3A

RS PRO Anti-Condensation Heaters


A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.

A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.

A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.

Features and Benefits


  • Vitreous enamelled resistor

  • Sheet Steel case

  • Perforated sheet Steel cover

    • Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom

    Why RS PRO?


    Looking to reduce costs but keep the same quality?

    With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.

    Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.

    Note

    The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

    Gerelateerde Links