RS PRO Enclosure Heater, 110V ac, 20W Output, 45°C, 70mm x 65mm x 67mm
- RS-stocknr.:
- 605-598
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 35,49
(excl. BTW)
€ 42,94
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 35,49 |
| 10 - 24 | € 34,28 |
| 25 - 49 | € 32,47 |
| 50 - 99 | € 30,06 |
| 100 + | € 27,04 |
- RS-stocknr.:
- 605-598
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
RS PRO Anti-Condensation Heaters
RS PRO anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles.
Vitreous enamelled resistor mounted in a sheet steel case.
Removable perforated sheet steel cover.
Removable perforated sheet steel cover.
Note
The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
Specificaties
Kenmerk | Waarde |
|---|---|
| Output Power | 20W |
| Supply Voltage | 110V ac |
| Surface Temperature | 45°C |
| Depth | 67mm |
| Height | 70mm |
| Width | 65mm |
- RS-stocknr.:
- 605-598
- Fabrikant:
- RS PRO