APEM A01ES Series Emergency Stop Push Button, Panel Mount, 16mm Cutout, 2NC
|Aantal stuks||Per stuk|
|1 - 14||20,36 €|
|15 - 49||19,77 €|
|50 - 99||19,18 €|
|100 - 249||18,61 €|
|250 +||18,04 €|
- Land van herkomst:
Wetgeving en conformiteit
- Land van herkomst:
AO1 Series Switches - 16mm Operators
Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety of applications. A complete Pushbutton switch assembly requires an operator, switch block, lens and lamp (if illuminated). Keylock and Rotary switches require an operator and switch block, while the Emergency Stop switch comes as a complete assembly supplied with a double pole N/C switch block and a yellow self adhesive label.
Panel sealing to IP65
Gold plated silver contacts
Pushbuttons illuminated with T1 midget groove filament lamp or LED
Keylocks supplied with 2 keys
Rotary lever switches 219-5784 & 219-5762 feature CW lever rotation, all others are CCW lever rotation
For switch blocks & lenses see stk nos 219-5829 & 239-3483 typically
Selection of accessories includes flipguards, flush mounting bezels, PCB sockets and installation tools, see stk nos 278-1262, 325-2800, 325-2816 & 241-5757 typically
Single and double pole PCB socket accessories are suitable for illuminated pushbuttons only.
BEAB, VDE, UL & CSA (Emergency Stop, VDE, UL & CSA only)
Features and Benefits
Operating temperature : -20°C to +55°C
Sealing options : front panel IP65, rear panel IP40 according to EN60947-5-5
Electrical function : push to shut off, twist to release
Current/voltage rating : AC-15 1,5A 250VAC, 6A 250VAC
Electrical life : 6.050 cycles
Insulation resistance : 50MΩ min
Dielectric test voltage : 2900V
Mechanical life : 6050 cycles
Operator case : polyetherimide
Actuator : polycarbonate
Switch block : PBT
Panel seal : neoprene
Frequently asked questions & answers
What is the different between a push button switch for an emergency stop and a general-purpose push button switch?
A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.
What is Trigger Action?
A standard operator can be teased enough to open a normally closed contact without latching into the depressed position. Trigger action units are spring loaded so they only depress the contact block after it latches into the depressed position.
|Mounting Type||Panel Mount|
|Push Button Actuation||Twist Release|
|Voltage Rating||250V ac|
|Push Button Material||Plastic|