Analog Devices LT1182CS#PBF SOIC Display Driver, 16 Pin, 4.5 → 6 V
- RS-stocknr.:
- 779-9132P
- Fabrikantnummer:
- LT1182CS#PBF
- Fabrikant:
- Analog Devices
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 779-9132P
- Fabrikantnummer:
- LT1182CS#PBF
- Fabrikant:
- Analog Devices
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Analog Devices | |
| Package Type | SOIC | |
| Display Type | LCD | |
| Number of Pins | 16 | |
| Supply Voltage | 4.5 → 6 V | |
| Minimum Operating Temperature | 0°C | |
| Mounting Type | Surface Mount | |
| Maximum Operating Temperature | +100°C | |
| Width | 3.988mm | |
| Height | 1.752mm | |
| Length | 10.01mm | |
| Alles selecteren | ||
|---|---|---|
Merk Analog Devices | ||
Package Type SOIC | ||
Display Type LCD | ||
Number of Pins 16 | ||
Supply Voltage 4.5 → 6 V | ||
Minimum Operating Temperature 0°C | ||
Mounting Type Surface Mount | ||
Maximum Operating Temperature +100°C | ||
Width 3.988mm | ||
Height 1.752mm | ||
Length 10.01mm | ||
- Land van herkomst:
- MY
Switching Regulators, LCD/CCD/OLED Bias, Linear Technology
Switching Voltage Regulators, Linear Technology
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.