STMicroelectronics LED Driver, 100 W Output, 5.5 mA

Bulkkorting beschikbaar

Subtotaal (1 verpakking van 10 eenheden)*

€ 8,87

(excl. BTW)

€ 10,73

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 20 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 - 40€ 0,887€ 8,87
50 - 90€ 0,862€ 8,62
100 - 240€ 0,839€ 8,39
250 - 490€ 0,818€ 8,18
500 +€ 0,797€ 7,97

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
193-9807
Fabrikantnummer:
HVLED007TR
Fabrikant:
STMicroelectronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

STMicroelectronics

Product Type

Display Driver

Maximum Output Power

100W

Input Voltage

10.5 to 22.5 V

Mount Type

Surface

Sub Type

LED Driver

Terminal Type

Solder

LED Voltage

0/1.5 V

Driver Current

5.5 mA

Operating Modes

Transition Mode

Number of Outputs

5

Series

HVLED007

Standards/Approvals

EN 61000-3-2

Power Dissipation

0.65W

Land van herkomst:
MA
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.

Gerelateerde Links