STMicroelectronics Inductor Switch Boost Controller, 37 V Output, 20 mA PWM
- RS-stocknr.:
- 188-9274
- Fabrikantnummer:
- STLD40DPUR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 3,47
(excl. BTW)
€ 4,20
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 3,47 |
| 10 - 99 | € 3,11 |
| 100 - 499 | € 3,02 |
| 500 - 999 | € 2,94 |
| 1000 + | € 2,90 |
*prijsindicatie
- RS-stocknr.:
- 188-9274
- Fabrikantnummer:
- STLD40DPUR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Display Driver | |
| Mount Type | Surface Mount | |
| Sub Type | Inductor Switch Boost Controller | |
| Dimming Operation | PWM | |
| Terminal Type | QFN8 | |
| Input Voltage Type | DC | |
| Series | STLD40D | |
| Standards/Approvals | RoHS | |
| Primary Type | Boost Converter | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Display Driver | ||
Mount Type Surface Mount | ||
Sub Type Inductor Switch Boost Controller | ||
Dimming Operation PWM | ||
Terminal Type QFN8 | ||
Input Voltage Type DC | ||
Series STLD40D | ||
Standards/Approvals RoHS | ||
Primary Type Boost Converter | ||
STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum Peak inductor current can be programmed by connected a resistor RSETto the pin RSET.
Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable Peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V
Gerelateerde Links
- STMicroelectronics Inductor Switch Boost Controller, 37 V Output, 20 mA PWM
- Recom LED Driver, 3/31 V Output, 37 W Output, 1200 mA PWM
- MEAN WELL, 37 V Output, 100 W Output 3 in 1, 10V PWM, Resistance
- PWM
- STMicroelectronics PWM Controller 40 V 8-Pin, SO
- STMicroelectronics STEVAL-L7983V33 Buck-Boost Controller for STEVAL
- STMicroelectronics LM334DT PWM Controller 40 V 8-Pin, SO
- STMicroelectronics LM234DT PWM Controller 40 V 8-Pin, SO
