Phoenix Contact 3004100 UK 5-HESI Series Black, 1mm², Single-Level, Screw Termination, Fused, ATEX

Bekijk deze categorie

Subtotaal (1 verpakking van 5 eenheden)*

€ 39,13

(excl. BTW)

€ 47,345

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • 90 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 +€ 7,826€ 39,13

*prijsindicatie

RS-stocknr.:
463-3862
Fabrikantnummer:
3004100
Fabrikant:
Phoenix Contact
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Phoenix Contact

Colour

Black

Number of Levels

Single

Series

UK 5-HESI

Voltage Rating

500 V

American Wire Gauge

26 → 10AWG

Termination Method

Screw

Cable CSA

1mm²

Fused

Yes

Current Rating

6.3A

Pitch

8.2mm

Minimum Operating Temperature

+105°C

Maximum Operating Temperature

-60°C

Hazardous Area Certification

ATEX

Standards Met

IEC 60947-7-3, IEC 60947-7-3

Model Number

UK 5-HESI

Land van herkomst:
TR

Phoenix Contact, Fused DIN Rail Terminals


The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the part.

Features and Benefits


• Large-surface labeling

• Safety lever locked in end position

• Hinged disconnect lever

• Flip-open compartment to accommodate a fuse

• Options to accommodate 5x20mm and 6.3x32mm fuses

• Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)

Typical Applications


• Protecting critical sensor or relay equipment

Note

Parameters in tech. spec. table are with respect to UL and CSA Approvals. With UL approval these products have a nominal rating of 10A @ 600V; with CSA approval they have a nominal rating of 25A @ 600V

Approvals

UL recognised component, CSA certified

Phoenix Contact Fused Terminal Block, 5mm Fuse, 6.3A - UK 5-HESI - 3004100


This terminal block from Phoenix Contact is a fuse carrier as well as a potential distributor. It allows for the user-friendly testing of a fuse and plays a vital role in protecting devices, such as relays, from over current and short circuits.
The device is quick to install as you can easily snap it onto a DIN rail without any tools. Its universal screw connectors permit multi-conductor connections that remove the need for re-tightening screws and prevent wires from being accidentally disengaged. For your convenience, a flip-open compartment makes it easy to install a fuse. The unit's rugged polyamide body stands up extremely well to hostile conditions and heavy-duty wear and tear.
The terminal block is compatible with conductors ranging in size from 26AWG to 10AWG (American Wire Gauge). It's easily mounted into a control cabinet and is useful in power and energy management applications.

• Certified as safe to use in hazardous areas where explosive atmospheres may be present
• Operating temperature range of -60°C to +125°C
• Conforms to the RoHS (Restriction of Hazardous Substances) directive, meaning it contains no more than minimal levels of hazardous substances
• Meets the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards, so it won't damage equipment via electrostatic discharge

Gerelateerde Links