SEGGER 8.06.13 J-Link Measurement+Patch Adapter Adapter

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 99,39

(excl. BTW)

€ 120,26

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 27 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 99,39

*prijsindicatie

RS-stocknr.:
201-0719
Fabrikantnummer:
8.06.13 J-Link Measurement+Patch Adapter
Fabrikant:
SEGGER
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SEGGER

Product Type

Development Kit Accessory

Accessory Type

Adapter

Standards/Approvals

No

The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20-pin 0.1" socket towards the J-Link debug probe and a standard 20-pin 0.1" header on the target side and can directly be inserted between the J-Link and the debug cable maintaining a 1:1 connection of all debug signals. For increased flexibility VTref on pin 1 and the target supply voltage on pin 19 can be interrupted by means of two jumpers.

Allows easy customized wiring between J-Link and targets that do not provide a standard debug connector that has already been addressed by one of the many available J-Link adapters

The wiring between J-Link and the target is done via coloured jumper wires

Includes:

Measurement Adapter Board

10 Jumper Wires for Manual Setup

Gerelateerde Links