SEGGER J-Trace Isolator

Bekijk deze categorie
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 432,78

(excl. BTW)

€ 523,66

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 4 stuk(s) vanaf 08 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 2€ 432,78
3 - 4€ 400,32
5 - 9€ 395,13
10 - 24€ 389,93
25 +€ 385,17

*prijsindicatie

RS-stocknr.:
172-3027
Fabrikantnummer:
8.07.10 J-Trace Isolator
Fabrikant:
SEGGER
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SEGGER

Kit Name

J-Trace Isolator

Product Type

Programmer

For Use With

19 Pin Cortex-M, ARM-Board

Land van herkomst:
DE

SEGGER Microcontroller J-Trace


The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential when the development tools are not connected to the same ground. It is useful to protect the development tools from electrical spikes that often occur in some applications.

Features and Benefits:


• 1 kV DC isolation
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz

Gerelateerde Links