Recom RO DC-DC Converter, 24V dc/ 42mA Output, 21.6 → 26.4 V dc Input, 1W, Through Hole, +85°C Max Temp -40°C
- RS-stocknr.:
- 672-8811
- Fabrikantnummer:
- RO-2424S
- Fabrikant:
- Recom
34 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Per stuk
€ 6,81
(excl. BTW)
€ 8,24
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 6,81 |
| 5 - 9 | € 6,61 |
| 10 - 24 | € 6,40 |
| 25 - 49 | € 6,20 |
| 50 + | € 6,00 |
- RS-stocknr.:
- 672-8811
- Fabrikantnummer:
- RO-2424S
- Fabrikant:
- Recom
- Land van herkomst:
- TW
Recom 1W SIP Single Output Unregulated Isolated DC-DC Converter - RO Series
Unregulated outputs
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
Note
MTBF to MIL-HDBK 217F
Operating temperature is without derating.
Operating temperature is without derating.
Standards
EN-60950-1
RECOM DC-DC Converter, Fully Encapsulated, 220μF Max Capacitive Load - RO Series - RO-2424S
Isolate power in your circuit board with this DC-DC converter from RECOM. As it can handle one second of 1000V DC power and one minute of 500V AC power at 60Hz before overloading, you can use it to prevent damage to your system. Further protecting your circuit is its black plastic casing that's non-conductive to minimise energy leaks. Thanks to the through-hole mounting, you can quickly install it by inserting the pins into the drilled holes on a PCB and then soldering them to the pads on the reverse side.
Features & Benefits
• Space-saving dimensions of 11.5 (L) x 6 (W) x 10mm (H) fits neatly in densely arranged circuit boards
• Wide operating temperature between -40°C to +85°C for use in harsh environments
• Input voltage range ±10% accounts for minor power fluctuations from 12V DC batteries
• Wide operating temperature between -40°C to +85°C for use in harsh environments
• Input voltage range ±10% accounts for minor power fluctuations from 12V DC batteries
Applications
• Consumer electronics
• Telecommunications industry
• Portable measuring devices
• Telecommunications industry
• Portable measuring devices
How does a DC-DC converter work?
These units pass power through a converter to turn the input DC voltage into AC power. This signal then passes through a second filter to turn it back to DC at the correct voltage.
Is this converter regulated or unregulated?
This converter is unregulated, which suits compact circuit systems that can handle minor fluctuations in power.
Kenmerk | Waarde |
|---|---|
| Output Voltage | 24V dc |
| Input Voltage Range | 21.6 → 26.4 V dc |
| Power Rating | 1W |
| Input Voltage Nominal | 24 V dc |
| Output Current | 42mA |
| Mounting Type | Through Hole |
| Isolated | Yes |
| Number of Outputs | 1 |
| Package | SIP |
| Isolation Voltage | 1kV dc |
| Width | 6mm |
| Length | 11.5mm |
| Depth | 10mm |
| Series | RO |
| Load Regulation | 10% |
| Efficiency | 85% |
| Minimum Temperature | -40°C |
| Maximum Temperature | +85°C |
- RS-stocknr.:
- 672-8811
- Fabrikantnummer:
- RO-2424S
- Fabrikant:
- Recom
- Land van herkomst:
- TW
Recom 1W SIP Single Output Unregulated Isolated DC-DC Converter - RO Series
Unregulated outputs
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
Note
MTBF to MIL-HDBK 217F
Operating temperature is without derating.
Operating temperature is without derating.
Standards
EN-60950-1
RECOM DC-DC Converter, Fully Encapsulated, 220μF Max Capacitive Load - RO Series - RO-2424S
Isolate power in your circuit board with this DC-DC converter from RECOM. As it can handle one second of 1000V DC power and one minute of 500V AC power at 60Hz before overloading, you can use it to prevent damage to your system. Further protecting your circuit is its black plastic casing that's non-conductive to minimise energy leaks. Thanks to the through-hole mounting, you can quickly install it by inserting the pins into the drilled holes on a PCB and then soldering them to the pads on the reverse side.
Features & Benefits
• Space-saving dimensions of 11.5 (L) x 6 (W) x 10mm (H) fits neatly in densely arranged circuit boards
• Wide operating temperature between -40°C to +85°C for use in harsh environments
• Input voltage range ±10% accounts for minor power fluctuations from 12V DC batteries
• Wide operating temperature between -40°C to +85°C for use in harsh environments
• Input voltage range ±10% accounts for minor power fluctuations from 12V DC batteries
Applications
• Consumer electronics
• Telecommunications industry
• Portable measuring devices
• Telecommunications industry
• Portable measuring devices
How does a DC-DC converter work?
These units pass power through a converter to turn the input DC voltage into AC power. This signal then passes through a second filter to turn it back to DC at the correct voltage.
Is this converter regulated or unregulated?
This converter is unregulated, which suits compact circuit systems that can handle minor fluctuations in power.
Kenmerk | Waarde |
|---|---|
| Output Voltage | 24V dc |
| Input Voltage Range | 21.6 → 26.4 V dc |
| Power Rating | 1W |
| Input Voltage Nominal | 24 V dc |
| Output Current | 42mA |
| Mounting Type | Through Hole |
| Isolated | Yes |
| Number of Outputs | 1 |
| Package | SIP |
| Isolation Voltage | 1kV dc |
| Width | 6mm |
| Length | 11.5mm |
| Depth | 10mm |
| Series | RO |
| Load Regulation | 10% |
| Efficiency | 85% |
| Minimum Temperature | -40°C |
| Maximum Temperature | +85°C |