TE Connectivity AMPLIMITE HD-20 9 Way Straight 2.77 mm Pitch Cable D-Sub Connector Male

RS-stocknr.:: 756-1108
Artikelnummer Distrelec:: 300-83-853
Fabrikantnummer:: 5-747904-5
Fabrikant:: TE Connectivity

TE Connectivity AMPLIMITE HD-20 9 Way Straight 2.77 mm Pitch Cable D-Sub Connector Male

Informatie over voorraden is momenteel niet toegankelijk

RS-stocknr.:: 756-1108
Artikelnummer Distrelec:: 300-83-853
Fabrikantnummer:: 5-747904-5
Fabrikant:: TE Connectivity

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	TE Connectivity
	Product Type	D-Sub Connector
	Number of Contacts	9
	Orientation	Straight
	Current	3A
	Mount Type	Cable
	Connector Gender	Male
	Connector Type D	D-Sub
	D-Sub Shell Size	E
	Housing Material	Steel
	Voltage	250V
	Minimum Operating Temperature	-55°C
	Termination Type	Solder
	Maximum Operating Temperature	105°C
	Contact Gender	Male
	Standards/Approvals	No
	Contact Material	Brass
	Series	AMPLIMITE HD-20
	Contact Plating	Gold over Nickel
	Pitch	2.77mm
	Contact Size	20

	Alles selecteren
	Merk TE Connectivity
	Product Type D-Sub Connector
	Number of Contacts 9
	Orientation Straight
	Current 3A
	Mount Type Cable
	Connector Gender Male
	Connector Type D D-Sub
	D-Sub Shell Size E
	Housing Material Steel
	Voltage 250V
	Minimum Operating Temperature -55°C
	Termination Type Solder
	Maximum Operating Temperature 105°C
	Contact Gender Male
	Standards/Approvals No
	Contact Material Brass
	Series AMPLIMITE HD-20
	Contact Plating Gold over Nickel
	Pitch 2.77mm
	Contact Size 20

9 way pin solder cup plug assembly, Amplimite HD-20 Series, 5-747904-5 - Customer Drawing

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.

For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.

• 65% higher density than HD-20 connectors

• Space saving

• 94V0 black thermoplastic insert

• Tin plated, steel Shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.

• Lower cost, commercial version of the military approved series.

• Tin or zinc plated shells, with or without grounding indents.

• Crimp snap-in contacts allows loading of only the number of contacts being used.

• Available with shielding hardware and shielding enclosure kits.

• Numerous cable clamps and mating hardware options.

• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787

• Male screw retainers – 450-9208 & 717-4498

• Female screw-locks – 717-4543 & 450-9270

• Locking post assembly – 450-9365

• Spring latch – 450-9321

• Latching Block with threaded hole – 450-9371

• Latching Block with slot recess – 680-9392

TE Connectivity AMPLIMITE D-Subminiature Connectors

Approvals

UL, cUL, CSA