Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- RS-stocknr.:
- 665-6224
- Artikelnummer Distrelec:
- 180-40-827
- Fabrikantnummer:
- 74 06 250 RS
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 73,87
(excl. BTW)
€ 89,38
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 8 stuk(s) klaar voor verzending
- 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 73,87 |
*prijsindicatie
- RS-stocknr.:
- 665-6224
- Artikelnummer Distrelec:
- 180-40-827
- Fabrikantnummer:
- 74 06 250 RS
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 250mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | Yes | |
| Application | Electronic | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | Chrome Vanadium Electric Steel | |
| Handle Material | Bi-Metal | |
| Grip Material | Plastic | |
| Maximum Cutting Capacity | 4.6mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 250mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved Yes | ||
Application Electronic | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material Chrome Vanadium Electric Steel | ||
Handle Material Bi-Metal | ||
Grip Material Plastic | ||
Maximum Cutting Capacity 4.6mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 74 06 250 High Leverage Diagonal Cutter insulated with multi-component grips, VDE-tested chrome-plated 250 mm
74 06 250 High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm² and aluminium conductors up to 35 mm². - Cutting capacities medium hard wire (diameter): Ø 4.6mm- Cutting capacities hard wire (diameter): Ø 3.5mm- Cutting capacities piano wire (diameter): Ø 3.0mm- VDE tested: yes
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
Gerelateerde Links
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Cable Cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.1 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.8 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.2 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4 mm With Bevel Cable Cutter
