Knipex Knipex Small Bevel Oblique Cutter
- RS-stocknr.:
- 665-6220
- Artikelnummer Distrelec:
- 304-22-877
- Fabrikantnummer:
- 64 72 120
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 67,15
(excl. BTW)
€ 81,25
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 67,15 |
*prijsindicatie
- RS-stocknr.:
- 665-6220
- Artikelnummer Distrelec:
- 304-22-877
- Fabrikantnummer:
- 64 72 120
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Oblique Cutter | |
| Sub Type | End Cutting Nipper | |
| Non-Sparking | No | |
| Overall Length | 120mm | |
| Jaw Width | 11mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic | |
| ESD Safe | No | |
| Jaw Material | Special Tool Steel | |
| Grip Material | Plastic | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 1.5mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | Small Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Oblique Cutter | ||
Sub Type End Cutting Nipper | ||
Non-Sparking No | ||
Overall Length 120mm | ||
Jaw Width 11mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic | ||
ESD Safe No | ||
Jaw Material Special Tool Steel | ||
Grip Material Plastic | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 1.5mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type Small Bevel | ||
Niet conform
- Land van herkomst:
- DE
Electronic front cutting pliers small bevel 120mm
Features / Benefits :
35° angle
Precision interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing (only finish 2) in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC;Special quality tool steel, forged, oil-hardened.