Knipex Knipex 2 mm Flush Plastic Cutter
- RS-stocknr.:
- 517-8552
- Fabrikantnummer:
- 72 21 160
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 62,71
(excl. BTW)
€ 75,88
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 31 stuk(s) vanaf 19 november 2026
- Plus verzending 14 stuk(s) vanaf 19 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 62,71 |
*prijsindicatie
- RS-stocknr.:
- 517-8552
- Fabrikantnummer:
- 72 21 160
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Plastic Cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 160mm | |
| Jaw Width | 11mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Flush Cutting, Thick Wire, Cutting Hard | |
| Jaw Material | Chrome Vanadium Electric Steel | |
| ESD Safe | No | |
| Grip Material | Plastic | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 2mm | |
| Standards/Approvals | DIN ISO 5749, VDE-Tested | |
| Cut Type | Flush | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Plastic Cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 160mm | ||
Jaw Width 11mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Flush Cutting, Thick Wire, Cutting Hard | ||
Jaw Material Chrome Vanadium Electric Steel | ||
ESD Safe No | ||
Grip Material Plastic | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 2mm | ||
Standards/Approvals DIN ISO 5749, VDE-Tested | ||
Cut Type Flush | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 72 21 160 Diagonal Cutters for plastics with plastic coating 160 mm
72 21 160 Diagonal Cutters for plastics Cutting face flush. For nearly flush cutting of moulded plastic components from sprues. Cuts soft materials such as lead in a flush cut. With opening spring. 85° angled blades. - Dimensions angle: 85
Technical attributes
Cutting Face Flush
For Nearly Flush Cutting Of Moulded Plastic Components From Sprues
Cuts Soft Materials Such As Lead In A Flush Cut
With Opening Spring
For Nearly Flush Cutting Of Moulded Plastic Components From Sprues
Cuts Soft Materials Such As Lead In A Flush Cut
With Opening Spring
Gerelateerde Links
- Knipex Knipex 2 mm Flush Plastic Cutter
- Knipex Knipex 4.6 mm Flush Plastic Cutter
- Knipex Knipex 2 mm Diagonal Plastic Cutter
- Knipex Knipex 15 mm Flush Cable Cutter
- Knipex Knipex Without Bevel Plastic Cutter
- Knipex Knipex 12 mm Flush Cable Cutter
- Knipex Knipex 3.8 mm Flush Side cutter
- Knipex Knipex 32 mm Flush Cable Cutter
