Knipex Knipex VDE/1000V Approved With Bevel Diagonal
- RS-stocknr.:
- 297-1982
- Fabrikantnummer:
- 70 07 180
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 51,78
(excl. BTW)
€ 62,65
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 4 stuk(s) klaar voor verzending
- 11 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 51,78 |
*prijsindicatie
- RS-stocknr.:
- 297-1982
- Fabrikantnummer:
- 70 07 180
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 180mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | Yes | |
| Height Safe | No | |
| Application | Electronic | |
| ESD Safe | No | |
| Jaw Material | Vanadium Electric Steel | |
| Handle Material | Dipped Insulation | |
| Grip Material | Plastic | |
| Maximum Cutting Capacity | 4mm | |
| Standards/Approvals | DIN EN 60900, DIN ISO 5749, IEC 60900 | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 180mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved Yes | ||
Height Safe No | ||
Application Electronic | ||
ESD Safe No | ||
Jaw Material Vanadium Electric Steel | ||
Handle Material Dipped Insulation | ||
Grip Material Plastic | ||
Maximum Cutting Capacity 4mm | ||
Standards/Approvals DIN EN 60900, DIN ISO 5749, IEC 60900 | ||
Cut Type With Bevel | ||
Vrijgesteld
- Land van herkomst:
- DE
Side cutter 180mm - 1000V insulated
Features / Benefits :
Chrome plated
High quality materials and precision finish for long life
Precision cutters for soft and hard wire
Clean cut of fine copper wires, even at the end of the cutting edge
Induction hardened cutting edges, hardness approx. 62 HRC
Narrow head for use in hard-to-reach areas;Vanadium electric steel, forged, oil-hardened in several stages.
Standards
EN 60900, DIN ISO 5749, VDE
Gerelateerde Links
- Knipex Knipex VDE/1000V Approved With Bevel Diagonal
- Knipex Knipex VDE/1000V Approved With Bevel Diagonal Cutter
- Knipex Knipex VDE/1000V Approved Small Bevel Diagonal
- Knipex Knipex VDE/1000V Approved With Bevel Chrome
- Knipex Knipex VDE/1000V Approved Diagonal Cutter
- Knipex Knipex VDE/1000V Approved With Bevel Cutter
- Knipex Knipex VDE/1000V Approved With Bevel
- Knipex Knipex VDE/1000V Approved With Bevel Side Cutter