Knipex Knipex 800 μm With Bevel Side cutter
- RS-stocknr.:
- 267-7111
- Fabrikantnummer:
- 75 52 125
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 53,97
(excl. BTW)
€ 65,30
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 7 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 53,97 |
*prijsindicatie
- RS-stocknr.:
- 267-7111
- Fabrikantnummer:
- 75 52 125
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 10.5mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Hard and Piano Wire, Soft | |
| Jaw Material | High Grade Special Tool Steel | |
| ESD Safe | No | |
| Grip Material | Plastic | |
| Handle Material | Plastic | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 800μm | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 10.5mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Hard and Piano Wire, Soft | ||
Jaw Material High Grade Special Tool Steel | ||
ESD Safe No | ||
Grip Material Plastic | ||
Handle Material Plastic | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 800μm | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 75 52 125 Electronics Diagonal Cutter with plastic handles burnished 125 mm
75 52 125 Electronics Diagonal Cutter For ultra fine cutting work, e.g. in electronics and fine mechanics. With sharp, ground cutting edges for soft and hard wire and piano wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Low-friction double spring for smooth and even opening. particularly narrow head, with bevel. - Cutting capacities medium hard wire (diameter): Ø 0.5mm- Cutting capacities hard wire (diameter): Ø 0.3mm- Cutting capacities soft wire (diameter): Ø 0.2 – 0.8mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 6.5mm- Head width (A): 10.5mm
Technical attributes
For Ultra Fine Cutting Work, E.G. In Electronics And Fine Mechanics
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
Gerelateerde Links
- Knipex Knipex 800 μm With Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 800 μm Small Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex 1 mm With Bevel Side cutter
- Knipex Knipex 3 mm With Bevel Side cutter
- Knipex Knipex 1.7 mm With Bevel Side cutter
- Knipex Knipex 1.5 mm With Bevel Side cutter
