Knipex Knipex 4.6 mm With Bevel Side cutter
- RS-stocknr.:
- 267-7093
- Artikelnummer Distrelec:
- 110-41-980
- Fabrikantnummer:
- 74 01 250
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 45,93
(excl. BTW)
€ 55,58
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 14 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 45,93 |
*prijsindicatie
- RS-stocknr.:
- 267-7093
- Artikelnummer Distrelec:
- 110-41-980
- Fabrikantnummer:
- 74 01 250
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal | |
| Non-Sparking | No | |
| Overall Length | 250mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Jaw Material | Special Quality Tool Steel | |
| ESD Safe | No | |
| Grip Material | Plastic | |
| Handle Material | Plastic | |
| Maximum Cutting Capacity | 4.6mm | |
| Standards/Approvals | DIN ISO 5749 | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal | ||
Non-Sparking No | ||
Overall Length 250mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Jaw Material Special Quality Tool Steel | ||
ESD Safe No | ||
Grip Material Plastic | ||
Handle Material Plastic | ||
Maximum Cutting Capacity 4.6mm | ||
Standards/Approvals DIN ISO 5749 | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 74 01 250 High Leverage Diagonal Cutter with plastic coating black atramentized 250 mm
74 01 250 High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm² and aluminium conductors up to 35 mm². - Cutting capacities medium hard wire (diameter): Ø 4.6mm- Cutting capacities hard wire (diameter): Ø 3.5mm- Cutting capacities piano wire (diameter): Ø 3.0mm
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
Gerelateerde Links
- Knipex Knipex 4.6 mm With Bevel Side cutter
- Knipex Knipex 4.6 mm Without Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex 3.1 mm With Bevel Side cutter
- Knipex Knipex 4.2 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Cable Cutter
- Knipex Knipex 3.8 mm With Bevel Side cutter
