CK ESD Safe 20 mm Full Flush Side cutter

RS-stocknr.:: 132-0976
Fabrikantnummer:: T3781DEF115
Fabrikant:: CK

CK ESD Safe 20 mm Full Flush Side cutter

Bekijk alle Cutters

Subtotaal (1 eenheid)*

€ 69,15

(excl. BTW)

€ 83,67

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

12 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 69,15

*prijsindicatie

RS-stocknr.:: 132-0976
Fabrikantnummer:: T3781DEF115
Fabrikant:: CK

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	CK
	Product Type	Side cutter
	Sub Type	Side Cutter
	Jaw Width	7.50mm
	Overall Length	125mm
	Jaw Length	13mm
	Application	ESD Electronic Pliers and Cutter
	ESD Safe	Yes
	Jaw Material	Special Alloy Steel
	Grip Material	2 Component
	Handle Material	Dual Component
	Maximum Cutting Capacity	20mm
	Standards/Approvals	DIN EN 61340 5.1 & 5.2
	Cut Type	Full Flush

	Alles selecteren
	Merk CK
	Product Type Side cutter
	Sub Type Side Cutter
	Jaw Width 7.50mm
	Overall Length 125mm
	Jaw Length 13mm
	Application ESD Electronic Pliers and Cutter
	ESD Safe Yes
	Jaw Material Special Alloy Steel
	Grip Material 2 Component
	Handle Material Dual Component
	Maximum Cutting Capacity 20mm
	Standards/Approvals DIN EN 61340 5.1 & 5.2
	Cut Type Full Flush

Datasheet

Vrijgesteld

Land van herkomst:: DE

CK ESD Bevel Side Cutter, 20mm Maximum Cutting Capacity, 125mm Length - T3781DEF115

This side cutter is an electrostatic-discharge‑safe tool designed for precision work on sensitive electronic assemblies. It combines an anti‑static construction with a flush‑cut geometry to remove components and trim leads while minimising the risk of ESD damage. The tool is intended for controlled environments where static‑safe handling is required.

Features and Benefits:

• Full flush cutting maintains near‑surface trim for neat finishes
• Special alloy steel jaws deliver Durable cutting edges
• 75 mm jaw width enables close access to confined areas
• Dual‑component handles reduce slippage during repetitive work
• ESD protection conforms to DIN EN 61340 5.1 & 5.2 standards

Applications

• Suitable for trimming component leads on populated boards
• Ideal for use in static‑controlled assembly benches
• Used with delicate electronic modules requiring ESD precautions
• Can be used for precision cable and wire end trimming
• Suitable for rework stations handling small SMD components

What jaw geometry allows near‑surface cuts?

The tool uses a full flush‑cut profile that leaves minimal protrusion after trimming.

How does the handle construction assist grip control?

The handles use a dual‑component material to combine firmness with a softer overmould for improved hand contact.

What certification ensures suitability in ESD environments?

Compliance with DIN EN 61340 5.1 & 5.2 indicates the tool meets requirements for electrostatic control.

What limits the cutting capability for thicker materials?

The cutter’s rated maximum cutting capacity is 20 mm, which defines its effective material thickness range.

What jaw dimensions support fine work in tight spaces?

The jaws measure 13 mm in length with a 7.5 mm width to permit precise access in confined areas.