Knipex Super Knips® With Bevel End Cutting Nipper
- RS-stocknr.:
- 288-904
- Artikelnummer Distrelec:
- 180-46-332
- Fabrikantnummer:
- 78 81 125
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 27,58
(excl. BTW)
€ 33,37
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending 84 stuk(s) vanaf 12 februari 2026
- Plus verzending 72 stuk(s) vanaf 19 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 27,58 |
*prijsindicatie
- RS-stocknr.:
- 288-904
- Artikelnummer Distrelec:
- 180-46-332
- Fabrikantnummer:
- 78 81 125
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | End Cutting Nipper | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 11mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Application | Electronic | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | Steel | |
| Grip Material | Plastic | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 1.6mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type End Cutting Nipper | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 11mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Application Electronic | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material Steel | ||
Grip Material Plastic | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 1.6mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
Vrijgesteld
- Land van herkomst:
- DE
Super Knips® Electronic Short Bevel Cutter 125mm
Features / Benefits :
Super Knips® 125 mm
Highly sharp ground edges without bevel
Perfectly machined tips also allow cutting of adjoining wires from Ø 0.2 mm
Controlled micro-shift shearing of the cutting edge for ultra-precise cutting of even the finest wires and long service life
Hinge with stainless steel rivet
Very flexible for less tiring work
With spring and opening limitation
Precision cutters with very small bevel, also suitable for hard wires
Induction hardened cutting edges, hardness approx. 64 HRC;Special steel, burnished.
Gerelateerde Links
- Knipex Super Knips® Precision Diagonal Cutter
- Knipex Super Knips® ESD Safe Precision Diagonal Cutter
- Knipex TwinForce® High Leverage Diagonal Cutter
- Knipex X-Cut® High Leverage Diagonal Cutter
- Knipex X-Cut® VDE/1000V Insulated High Leverage Diagonal Cutter
- Knipex Knipex Diagonal Cutter
- Knipex Knipex VDE/1000V Insulated Diagonal Cutter
- Knipex Knipex Precision Diagonal Cutter
