Knipex Knipex 3.4 mm With Bevel Side cutter
- RS-stocknr.:
- 288-819
- Artikelnummer Distrelec:
- 180-40-828
- Fabrikantnummer:
- 74 12 160
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 41,56
(excl. BTW)
€ 50,29
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 18 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 41,56 |
*prijsindicatie
- RS-stocknr.:
- 288-819
- Artikelnummer Distrelec:
- 180-40-828
- Fabrikantnummer:
- 74 12 160
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 160mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic | |
| Jaw Material | Steel | |
| ESD Safe | No | |
| Grip Material | Plastic | |
| Handle Material | Bi-Metal | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 3.4mm | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 160mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic | ||
Jaw Material Steel | ||
ESD Safe No | ||
Grip Material Plastic | ||
Handle Material Bi-Metal | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 3.4mm | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 74 12 160 High Leverage Diagonal Cutter with multi-component handles black atramentized 160 mm
74 12 160 High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. with opening spring
to be activated if required. - Cutting capacities medium hard wire (diameter): Ø 3.4mm- Cutting capacities hard wire (diameter): Ø 2.5mm- Cutting capacities piano wire (diameter): Ø 2.0mm
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
Gerelateerde Links
- Knipex Knipex 3.1 mm With Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.1 mm With Bevel Side cutter
- Knipex Knipex 4.2 mm With Bevel Side cutter
- Knipex Knipex 4.6 mm With Bevel Side cutter
- Knipex Knipex 3.8 mm With Bevel Side cutter
- Knipex Knipex 4 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
