Aoip Instrumentation CP-6632 Current & Voltage Calibrator, Max Voltage 50V 25 mA

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 803,23

(excl. BTW)

€ 971,91

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 7 stuk(s) vanaf 02 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 803,23

*prijsindicatie

RS-stocknr.:
508-3735
Fabrikantnummer:
CP6632
Fabrikant:
Aoip Instrumentation
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Aoip Instrumentation

Product Type

Current & Voltage Calibrator

Maximum Voltage Measurement

50V

Maximum Current Measurement

25mA

Accuracy

±0.015 %

Standards/Approvals

No

Power Source

Battery

Battery Type

AA

Weight

306g

Height

45mm

Length

157mm

Maximum Operating Temperature

50°C

Hazardous Area Certification

No

Maximum Source Current

25mA

Minimum Source Voltage

0V

Width

85 mm

Maximum Source Voltage

15V

Model Number

CP-6632

Minimum Operating Temperature

-10°C

Minimum Source Current

0mA

Safety Category Level

CAT II

Safety Category Voltage

60V

Vrijgesteld

Land van herkomst:
FR

Aoip Instrumentation Current and Voltage Calibrator


The Aoip Instrumentation current and voltage calibrator is an accurate handheld instrument for process signals (150 ppm reading accuracy). This device measures or generates process current and voltage. It has a current measurement from 0mA to 25mA with 24V loop power supply and voltage from 0V to 50V. The calibrator is robust and easy-to-use. This tool has been designed to make maintenance operations easier on sensors and transmitters using process signals such as 4-20mA or 0-10V. The instrument is adapted to the various process installations due to scaling function and specific ranges. It is responsible for simulating ramps, steps, and fixed values to control process transmitters, panel meters and recorders.

Features and Benefits


Voltage/ current calibrator for process loops.

Current simulations from 0mA to 25mA with 24V loop power supply and voltage from 0V to 15V

High accuracy 0.015% reading with an adjustable resolution of 1mV and 1μA

Values displayed in A, mV and, %

Low temperature coefficient: 15ppm/°C in voltage and 20ppm/°C in current

Active or passive loop power supply

Measurements with HOLD function

Simulation of ramps, pre-programmed steps and synthesiser values

Display of minimum, maximum and average value

Delivered with 4 alkaline AA batteries in standard

Backlight enabled

Continuity test

Compatible with HART transmitters

Impact proof sheathing

USB socket for downloading

Supplied with measurement cables

Applications


Electrical servicing and maintenance

Laboratories

Electronic servicing and maintenance

Industrial automation

Certifications


IP45 rated

EN 61010-1

EN 61000-4-2

EN 61000-4-3

EN 61000-4-5

EN 61000-4-6

EN 61000-4-11

EN 61000-3-2

EN 61000-3-3

EN 55022, class B

CP6632 voltage / current calibrator


Voltage / current calibrator for process loops.

Current simulations from 0 → 25 mA with 24 V loop power supply and voltage from 0 → 15 V.

Current measurement from 0 → 25 mA with 24 V loop power supply and voltage from 0 → 50 V.

Continuity test.

Compatible with HART transmitters.

Calibration of transmitters, on-site measurements, integrated valve test.

Scaling in units and in % for easy reading of data with double display for 4 → 20 mA and 0 → 10 V process signals.

Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function.

Graphic display on screen with date and time, backlit with adjustable contrast. Selectable display resolution of up to 0.001 mA or 0.001 V.

Display of measurement statistics: Min, Max and Average.

Impact proof sheathing.

USB socket for downloading.

Supplied with measurement cables.

Note

Powered by 4 AA batteries or by using battery charger kit (this has EU not UK plug) available separately: AN6011 5083757

Gerelateerde Links