onsemi, Current Sensor IC 8-Pin, SOIC
- RS-stocknr.:
- 284-9052P
- Fabrikantnummer:
- NCV84120DR2G
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 81,70
(excl. BTW)
€ 98,85
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2.495 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,634 |
| 100 - 495 | € 1,416 |
| 500 - 995 | € 1,246 |
| 1000 + | € 1,132 |
*prijsindicatie
- RS-stocknr.:
- 284-9052P
- Fabrikantnummer:
- NCV84120DR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Current Sensor IC | |
| Current Rating | 18 A | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 28V | |
| Maximum Supply Voltage | 41V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 5mm | |
| Width | 3.9 mm | |
| Height | 1.75mm | |
| Series | NCV84120 | |
| Standards/Approvals | RoHS, REACH | |
| Automotive Standard | AEC-Q100-011 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Current Sensor IC | ||
Current Rating 18 A | ||
Package Type SOIC | ||
Pin Count 8 | ||
Mount Type Surface | ||
Minimum Supply Voltage 28V | ||
Maximum Supply Voltage 41V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 5mm | ||
Width 3.9 mm | ||
Height 1.75mm | ||
Series NCV84120 | ||
Standards/Approvals RoHS, REACH | ||
Automotive Standard AEC-Q100-011 | ||
The ON Semiconductor fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over−temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated current sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection.
Short circuit protection with inrush current management
Very low standby current
Very low current sense leakage
Proportional load current sense
Current sense enable
Off state open load detection