Allegro Microsystems, Current Sensor 8-Pin, SOIC
- RS-stocknr.:
- 146-4509P
- Fabrikantnummer:
- ACS730KLCTR-40AB-T
- Fabrikant:
- Allegro Microsystems
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 146-4509P
- Fabrikantnummer:
- ACS730KLCTR-40AB-T
- Fabrikant:
- Allegro Microsystems
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Allegro Microsystems | |
| Product Type | Current Sensor | |
| Offset Voltage | 75 mV | |
| Package Type | SOIC | |
| Bandwidth | 1MHz | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.5mm | |
| Standards/Approvals | RoHS | |
| Series | ACS730 | |
| Length | 4.9mm | |
| Width | 3.9 mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Allegro Microsystems | ||
Product Type Current Sensor | ||
Offset Voltage 75 mV | ||
Package Type SOIC | ||
Bandwidth 1MHz | ||
Pin Count 8 | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 1.5mm | ||
Standards/Approvals RoHS | ||
Series ACS730 | ||
Length 4.9mm | ||
Width 3.9 mm | ||
Automotive Standard No | ||
- Land van herkomst:
- PH
The Allegro™ ACS730 current sensor family provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die.
Current Sensing 40A;High bandwidth 1 MHz analog output
1.2 mΩ primary conductor resistance for low power loss and high inrush current withstanding capability
5 V, single supply operation
Output voltage proportional to AC or DC current
Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
High PSRR for noisy
