NCS199A2SQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- RS-stocknr.:
- 920-9837P
- Fabrikantnummer:
- NCS199A2SQT2G
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 16,45
(excl. BTW)
€ 19,90
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 50 - 190 | € 0,329 |
| 200 - 490 | € 0,289 |
| 500 + | € 0,266 |
*prijsindicatie
- RS-stocknr.:
- 920-9837P
- Fabrikantnummer:
- NCS199A2SQT2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Power Supply Type | Single | |
| Typical Single Supply Voltage | 2.7 → 26 V | |
| Minimum CMRR | 100dB | |
| Number of Channels per Chip | 1 | |
| Output Type | Rail to Rail | |
| Maximum Supply Current | 5 mA | |
| Mounting Type | Surface Mount | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Dimensions | 2.2 x 1.35 x 1mm | |
| Height | 1mm | |
| Length | 2.2mm | |
| Maximum Operating Supply Voltage | 26 V | |
| Width | 1.35mm | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Supply Voltage | 2.7 V | |
| Minimum Operating Temperature | -40 °C | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Power Supply Type Single | ||
Typical Single Supply Voltage 2.7 → 26 V | ||
Minimum CMRR 100dB | ||
Number of Channels per Chip 1 | ||
Output Type Rail to Rail | ||
Maximum Supply Current 5 mA | ||
Mounting Type Surface Mount | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Dimensions 2.2 x 1.35 x 1mm | ||
Height 1mm | ||
Length 2.2mm | ||
Maximum Operating Supply Voltage 26 V | ||
Width 1.35mm | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Supply Voltage 2.7 V | ||
Minimum Operating Temperature -40 °C | ||
Current Sensing Amplifiers, ON Semiconductor
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.